Chapter 1 — Using the SF51
Intermec
Status light
SF51 Lights: The status light turns green or red to indicate the status of the battery and scanning. The blue Intermec
Status Light Description
Light State | What It Means |
Blinks green one time | The SF51 successfully decoded a bar |
| code and sent the data to the host. |
| The SF51 successfully scanned a |
| configuration bar code. |
|
|
Flashes red when you | The battery is low. You need to place |
press the Scan button | the SF51 in the |
Flashes red and stays | You scanned a bar code, but the data |
on for 2 seconds | was not sent to the host. |
| You scanned a configuration bar code |
| and the SF51 did not accept it. |
|
|
Note: When the SF51 is in the
SF51 Cordless Scanner User’s Guide | 5 |