Chapter 1 — Using the SF51
If you are scanning a 2D bar code, pass the beam over the bar code label in a steady sweeping motion. The scanner emits a crackle sound.
Scanning With the SF51: There are two different ways to comfortably hold the SF51.
When the SF51 successfully reads a bar code label, you hear a single beep and the status light briefly turns green. If Vibrate Alert is enabled, the SF51 briefly vibrates.
5Release the Scan button.
Collecting Data With Your SF51
After you connect your SF51 to your host device, you are ready to start collecting data. The method you use depends on whether you are using:
•an Intermec computer.
•a host PC.
To collect data using an Intermec computer
1Establish a Bluetooth connection between the SF51 and your Intermec computer. For help, see “Connecting the SF51 to a Host Device” on page 16.
2Start your data collection application on your Intermec computer.
SF51 Cordless Scanner User’s Guide | 9 |