Chapter 1 — Using the SF51
Intermec Ready-to-Work Indicator Description
Light State | What It Means |
Off | A Bluetooth connection to the host computer is |
| not established. |
|
|
Blinking | The SF51 is trying to establish a Bluetooth |
| connection with the host computer, or the SF51 is |
| moving out of range of the host computer. |
|
|
On | A Bluetooth connection with the host computer |
| has been established. The SF51 is ready to scan |
| bar codes and send data to the host computer. |
|
|
Understanding the Beeps
The SF51 uses beeps to give you audio feedback when it performs some functions. For example, you hear a beep each time you scan a valid bar code.
SF51 Beeps Description
Beep Sequence | What It Means |
Single beep | The SF51 successfully decoded a bar code |
| or scanned a configuration bar code. |
|
|
Series of beeps from | The SF51 connected to a Bluetooth host. |
low to high |
|
|
|
Series of beeps from | A Bluetooth connection has been lost. |
high to low |
|
|
|
Three beeps | Data was not successfully sent to the |
| host. The SF51 is out of range of the |
| host. |
| A configuration bar code was not |
| successfully scanned. |
|
|
Continuous | The host PC is paging the SF51. After |
beeping for 1 | you find the SF51, press the Scan button |
minute | to stop the beeps. For more information |
| about paging the SF51, see “Locating the |
| SF51” on page 28. |
|
|
6 | SF51 Cordless Scanner User’s Guide |