Chapter 2 — Configuring and Managing the SF51
How to Configure the SF51 Parameters
You can configure many parameters on the SF51, such as the bar code symbologies it decodes or the volume of the beeper. These characteristics are controlled by configuration commands. The values you set for these configuration commands determine how the scanner operates.
You can configure the SF51:
•using EasySet version 5.2 or later either online or offline.
•remotely from your Intermec computer.
Configuring With EasySet
EasySet is an Intermec configuration application that provides you with two ways to configure the SF51:
•Online: Send configuration commands directly to the SF51.
•Offline: Send configuration commands to a bar code setup sheet. You can scan the bar codes onscreen with your SF51 or print the setup sheet and scan the bar codes. You do not need a Bluetooth connection to use this method.
To configure the SF51 online with EasySet
1Establish a Bluetooth connection with your host PC. For help, see the For help, see the USB Bluetooth Adapter Instructions (P/N 074479).
2Start EasySet. The first time you start EasySet, the Select product dialog box appears.
If the Select product dialog box does not appear, choose Product > Select.
3Select the SF51.
4Select the Online Setup check box, and click OK. The Online Setup dialog box appears.
5Select the COM port that your SF51 is using for Bluetooth communications, and click OK.
EasySet connects to your SF51 and retrieves the current configuration of the SF51.
12 | SF51 Cordless Scanner User’s Guide |