Intermec PB3 manual Using the 2-Bay Battery Charger, To use the 2-bay charger

Page 16

After about three hours the Battery LED turns off. The battery is fully charged.

1011 12 1 2

93

8		4
7	6	5

Note: The wall mounted charger is Class II equipment. Multiple plug configurations comply with most international standards. The wall mounted charger is not supplied with plugs for use in Korea.

Using the 2-Bay Battery Charger

Use the 2-bay battery charger to charge the batteries.

To use the 2-bay charger

1Plug the AC adapter into the 2-bay charger.

2Connect the adapter to AC power. The Status LEDs turn green, indicating that the charger is ready to use.

Status LEDs

3With the contacts on the bottom and the arrow pointing toward the LEDs, place a battery into one of the bays.

6	PB3 Mobile Printer User’s Guide

Image 16

Contents PB3 PB3 Mobile Printer User’s Guide Document Change Record Version Number DatePB3 Mobile Printer User’s Guide Contents Pinout Diagram Global Services and Support Safety InformationBefore You Begin Web Support Telephone Support Related Documents Who Should Read This ManualTo download documents Before You Begin Understanding the Printer Features Learning About the PB3 Mobile PrinterPB3 Feature Descriptions Feature DescriptionPB3 LED State Descriptions Understanding the LEDsState Description Using the Battery and AC Adapter/Charger To install the batteryTo remove the battery To charge the battery with the AC adapter/chargerUsing the 2-Bay Battery Charger To use the 2-bay chargerBattery Safety Information Loading Paper To load paperTearing Paper Using the Belt Loop Printing a Configuration Test To print a testCommunicating With a Host PBXA021ESetting Up Bluetooth or 802.11 Communications To download the Easy Configuration UtilitySetting Up IrDA Communications Setting Up Serial CommunicationsChanging Printer Connection Settings To change printer settings with the DIP switchesOFF DIP Switch Settings To Set This ParameterMaintaining the Printer Using the Magnetic Stripe ReaderTo use the magnetic stripe reader Troubleshooting To clean the printhead and platen rollerPB3 Problems and Solutions Problems and SolutionsProblem Solution Calling Product Support Software and Programming InformationDownloading Printer Software Installing Printer Firmware To install firmware and configure printer hardwareConfiguration Test Page on Select Control Macro PB3 Mobile Printer Specifications SpecificationsSpecification Description Accessories Pinout DiagramPin Signal Description Serial Port Pin AssignmentsPage PB3 Mobile Printer User’s Guide