Intermec PB3 manual DIP Switch Settings, To Set This Parameter

DIP Switch Settings

		Turn These DIP Switches On
To Set This Parameter		1 2	3	4	5 6 7 8
Enable Bluetooth or 802.11 connection		X
Enable RS-232 (serial) connection
Enable IrDA connection with a variable		X
baud rate of 9600 to 115200
Enable IrDA connection with the default		X	X		X
baud rate fixed to 9600
Set baud rate for IrDA and	115200
RS-232 connections:
	57600		X
	38400			X
	19200		X	X
	14400				X
	9600		X		X
	2400			X	X
	1200		X	X	X
Parity Bit	Enabled				X
	Disabled
	(no parity)
Odd/Even (Parity Bit	Even				X
must be Enabled, and
does not apply to IrDA)
	Odd
Auto Power Save	Enabled				X
	Disabled

Note: If you are configuring the PB3 for a Bluetooth or 802.11 connection, make sure DIP switches 3, 4, and 5 are off.

3Install the battery in the printer and close the battery door. The printer is now configured for your connection.

PB3 Mobile Printer User’s Guide 17