Intermec PB3 manual Tearing Paper

Page 19

3Unroll about 3 inches of paper from the roll and position it between the printhead guides.

Printhead guide

Printhead guide

4Close the paper door. The door clicks when completely closed.

5Fold the door handle flush with the printer.

6Press the Power button to turn the printer on.

7Press and hold the Feed button to verify that the paper advances correctly.

Tearing Paper

Note: Using the tear bar is the only way to tear the paper. Pulling up and pulling sideways without using the tear bar can cause a paper jam.

The paper door acts as a tear bar. Pull one edge of the paper against the tear bar, and then tear down and across against the tear bar to tear the paper.

The tear bar has sharp edges. Be careful when tearing paper or when handling the paper door.

PB3 Mobile Printer User’s Guide

9

Image 19
Contents PB3 PB3 Mobile Printer User’s Guide Version Number Date Document Change RecordPB3 Mobile Printer User’s Guide Contents Pinout Diagram Global Services and Support Safety InformationBefore You Begin Web Support Telephone Support Related Documents Who Should Read This ManualTo download documents Before You Begin Learning About the PB3 Mobile Printer Understanding the Printer FeaturesFeature Description PB3 Feature DescriptionsPB3 LED State Descriptions Understanding the LEDsState Description To install the battery Using the Battery and AC Adapter/ChargerTo charge the battery with the AC adapter/charger To remove the batteryTo use the 2-bay charger Using the 2-Bay Battery ChargerBattery Safety Information To load paper Loading PaperTearing Paper Using the Belt Loop To print a test Printing a Configuration TestPBXA021E Communicating With a HostTo download the Easy Configuration Utility Setting Up Bluetooth or 802.11 CommunicationsSetting Up Serial Communications Setting Up IrDA CommunicationsTo change printer settings with the DIP switches Changing Printer Connection SettingsOFF To Set This Parameter DIP Switch SettingsMaintaining the Printer Using the Magnetic Stripe ReaderTo use the magnetic stripe reader To clean the printhead and platen roller TroubleshootingPB3 Problems and Solutions Problems and SolutionsProblem Solution Calling Product Support Software and Programming InformationDownloading Printer Software To install firmware and configure printer hardware Installing Printer FirmwareConfiguration Test Page on Select Control Macro PB3 Mobile Printer Specifications SpecificationsSpecification Description Serial Port Pin Assignments AccessoriesPinout Diagram Pin Signal DescriptionPage PB3 Mobile Printer User’s Guide