HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966
The screen is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session.
Advanced WAN – PPPoE
Select WAN port & Session
WAN Port – Selected WAN port using the PPPoE connection
PPPoE Session – Usually the ISP provides multiple floating real IPs for PPPoE. Each WAN port can have up to 8 PPPoE sessions with different IP addresses, if your WAN port is
using a PPPoE connection.
PPPoE Session MTU – The Maximum Transfer Unit for PPPoE packet data. Leave it at the default, unless the ISP specifies a different PPPoE packet data size. The default value of MTU is 1492 bytes.
WAN IP Account
User Name – Enter the PPPoE user name assigned by your ISP.
Password – Enter the PPPoE password assigned by your ISP.
Verify Password –
23