HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966
Dynamic DNS Service
This
Disable – Dynamic DNS is not used.
TZO – Select this to use the TZO service (www.tzo.com). You must configure the TZO section of this screen.
DynDNS – Select this to use the standard service (from www.dyndns.org or another provider). You must configure the Standard Client section of this screen.
3322(in China) – This service is available in China. It is similar to “DynDNS”
User Defined DDNS Server – This is the user defined DDNS server. If the DDNS is not TZO, dyndns.org and 3322.
Additional settings
These options are available if using the standard client.
Enable Wildcard – If selected, traffic sent to
Enable backup MX – If enabled, you must enter the Mail Exchanger address below.
Mail Exchanger – If the setting above is enabled, enter the address of the backup Mail Exchanger.
WAN Port Binding
Select the WAN port used by the Dynamic DNS service.
The "Force Update" button will update your record on the Dynamic DNS Server immediately.
35