HotBrick VPN 800/8 F manual Advanced configuration Special Application

HotBrick, Tel: 305-398-0888, Fax: 305-398-5966

Advanced configuration - Special Application

If you use Internet applications that use non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the VPN800/8 F

Firewall. In this case, you must define the application as a "Special Application”

in order for the application to work.

Note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from the client (PC) viewpoint

Advanced configuration - Special Application.

Enable – Use this to Enable or Disable this Special Application as required

Name – Enter a descriptive name to identify this Special Application.

Outgoing Protocol –Select the protocol used by this application, when sending data to the remote server or PC.

Outgoing Port Range – Enter the beginning and end of the range of port numbers used by the application server for data you send. If the application uses a single port number, enter it in both fields.

Incoming Protocol – Select the protocol used by this application when receiving data from the remote server or PC.

Incoming Port Range –Enter the beginning and end of the range of port numbers used by the application server, for data you receive. If the application uses a single port number, enter it in both fields.

Buttons

Add – Create a new Special Application entry.

Delete – Delete the selected entry.

Update – Save any changes you have made to the current entry.

Cancel – Cancel any changes you have made since the last save operation.

33