HotBrick VPN 800/8 F manual Default Settings, Tftp Download

HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966

Rear Panel

Figure 1-3: Rear Panel

AC 100V ~ 240V Connect to AC100~240V / 50~60Hz with AC power cord.

Default Settings

When the VPN800/8 F Firewall has finished booting, all configuration settings will initially be set to the factory defaults, including:

IP Address set to its default value of 192.168.1.1, with a Network Mask of 255.255.255.0

DHCP Server is enabled

User Name: admin

Password cleared (no password)

TFTP Download

This setting should be used only if your VPN800/8 F Firewall interface can ’t be accessed, and you wish to restore it by uploading new firmware. In that case use the following procedure:

1.Power on the VPN800/8 F Firewall.

2.Use the supplied Windows utility or a TFTP client program to apply the new firmware. If you are using the supplied Windows TFTP program, the screen will look like the following example.

Figure 1-4: Windows TFTP utility

Enter the name of the firmware upgrade file on your PC, or click the "Browse" button to locate the file.

Enter the LAN IP address of the VPN800/8 F Firewall in the "Server IP" field.

Click "Upgrade Firmware" to send the file to the Multi-WAN VPN Link Balancer.

3.When uploading is finished the unit should function normally, using the default settings.

9