HotBrick, Tel: 305
Other Features
WAN Ports: 2 Up to 8 10/100 Mbps
The VPN 800/8 F has 2 up to 8 WAN 10/100Mbps ports with a combination of any of the flex ports.
Flex Ports
The VPN 800/8 F has a total of 6 Flex ports that can be configured to be addditional WAN Ports or additonal LAN ports by default the Flex Ports are LAN ports .
LAN Switch Ports: 8 Up to 16 10/100 Mbps Switch
The VPN 800/8 F is an 8 up to 14 LAN 10/100 Mbps switch port with a combination of any of the flex ports,
for you to share your cable/DSL connection with up to 253 users, class C subnet, on your LAN (using additional switches and/or hubs), if there are less than 14 PCs/Nodes in your network there is no need of a switch or hub.
DHCP Server Support
Dynamic Host Configuration Protocol provides dynamic IP addresses to PCs and other devices upon request. The VPN800/8 F Firewall can act as a DHCP Server for devices
on your local LAN.
Multi Segment LAN Support
LANs containing one or more segments are supported, via the
Easy Setup
Use your favorite WEB browser for configuration.
Remote Management
The VPN800/8 F Firewall can be managed from any PC on your LAN. If the Internet connection is active, the unit can also (optionally) be configured via the Internet.
Password - protected Configuration
Optional password protection is provided to prevent unauthorized users from modifying the configuration data and settings.
HTTP Firmware Upgrade and backup
The web management feature allows you to use HTTP to upgrade new firmware and backup
the system configuration from the local or even from the remote site (as long as you enable “Remote Upgrade” and “Remote
Email Alert
A warning email can be sent to the system administrator if one of the WAN ports drops provided two WAN ports are enabled. Also, there is excessive ping notification available.
Syslog
Real time system information can be generated on the web page or a particular machine. This is very useful when monitoring the device.
QoS Configuration.
This function gives specified packets a higher priority for
UPnP
If UPnP (Universal Plug & Play) is set to “Enable”, the VPN800/8 Firewall becomes one of
the network devices. This is useful for discovering and controlling network devices, such as the Internet gateway.
6