HANNspree SN22A1 APM Configuration, USB Device Wakeup From S3 Enabling this will, Hardware Health

		BIOS Setup Utility
APM Configuration	Selects to make advanced power management settings.
	•	USB Device Wakeup From S3: Enabling this will
		allow you to use a USB device to wake up the
		system.
	•	Restore on AC Power Loss: Sets the system state
		when an unexpected power outage or shutdown
		occurs.
		• Power Off: The system remains off after power
		is restored.
		• Power On: The system reboots after the power
		is restored.
		• Last State: The system returns to the state at
		the time the power outage or shutdown
		occurred.
	•	Resume On LAN: Enabling this will wake up the
		system when a wake-up signal is received from the
		network.
	•	Resume On RTC Alarm: Enabling this will allow
		you to specify the Date, Hour, Minute, and Second
		for the system to boot up.
Hardware Health	Selects to make hardware health monitoring settings.
Configuration	•	Shutdown Temperature: Enabling this will allow
		you to set up the system shutdown temperature from
		a range of 95 °C to 105 °C.
	•	H/W Health Function: Enabling this will display the
		hardware condition of your system. Selecting
		Disabled will hide these information.
USB Configuration	Selects to display the information about your USB.

SN22A1 40