PERFORMANCE SPECIFICATIONS
TRM6.1
Free Field Frequency Response | |
Peak Acoustic Output | ≥119dB (per pair w/music @ 1m) |
Total Harmonic Distortion (THD) | <0.5%, |
High Frequency Driver | 1" (25mm) Vifa Soft Dome |
Low Frequency Driver | 6.5" (165mm) Polypropylene Cone/ |
| Inverted Nitrile Rubber Surround |
| Magnetically Shielded |
Cabinet | 0.26 ft3 (7.3 liters) Vented |
Front Panel: | Power Switch |
| System LED (Power/Clip/Thermal) |
Rear Panel: | XLR Balanced Input |
| RCA Unbalanced Jack |
| Unbalanced/Balanced DIP Switch |
| Input Sensitivity DIP Switches |
| Bass Rolloff DIP Switches |
| Bass Shelving DIP Switches |
| Treble Shelving DIP Switches |
| IEC Standard Line Input / AC Line Fuse |
Dimensions | 8.875"W x 13.25"H x 11.50"D |
| (22.54cm x 33.65cm x 29.21cm) |
Net Weight | 23 lbs. (10.43kg) |
Frequency Response
@ 1m on axis
Energy Time Curve
AMPLIFIER SECTION
Power Rating | FTC |
| 35 Watts RMS @ 6 ohms (high frequency) |
| 50 Watts RMS @ 4 ohms (low frequency) |
| >100dB |
CMRR | >70dB typical @ 1kHz |
Input Impedance | 47kΩ per phase balanced, 47kΩ unbalanced |
Input Sensitivity Range | 500mV to 3V (unbalanced) |
| 275mV to 1.5V (per phase balanced) |
| (+4dB, +1dB, |
Gain | +33dB max. to +18dB min. |
Power Consumption | Idle Power: 11W / 150mA @ 115 VAC |
(both channels driven) | Idle Power: 11W / 75mA @ 230 VAC |
| Normal Operation: 55W / 600mA @ 120 VAC |
| Normal Operation: 54W / 310mA @ 230VAC |
| Full Power: 139W / 1.37A @ 120VAC |
| Full Power: 130W / 680mA @ 230VAC |
CROSSOVER SECTION |
|
Crossover Frequency | 3.2kHz |
Crossover Slope | 24dB/octave |
Subsonic Filter | Selectable 30Hz or 60Hz @ 12dB/octave |
Bass Shelving | 30Hz to 200Hz, ±4dB |
| (+4dB, +2dB, 0dB, |
Treble Shelving | 5kHz to 20kHz, ±4dB |
| (+4dB, +2dB, 0dB, |
Specifications are subject to change without notice.
– i –
Horizontal Polar Response
Dimensions |