Hafler manual MODEL TRM6.1CE, Qualified Service Personnel Only, Amplifier Replacement

			Qualified Service Personnel Only
AMPLIFIER REPLACEMENT
1. Remove (2) screws from back using a 3/32" Allen Wrench		(FIG. 5)
2.	Disconnect PCB mounted LED harness (FIG. 6)
3.	Disconnect PCB mounted tweeter speaker wires (FIG. 7)
4.	Disconnect PCB mounted woofer speaker wires (FIG. 7)
5.	Disconnect PCB mounted transformer primary wires (FIG. 8)		Remove
6.	Disconnect PCB mounted transformer secondary wires (FIG. 8)
			only
7.	Disconnect PCB mounted power switch wires (FIG. 8)
			these
CAUTION: Reconnect wires as indicated in diagram!			(2) screws
			FIG. 5
			Amplifier Replacement

FIG. 6

PCB Mounted LED Harness

FIG. 7	FIG. 8
PCB Mounted Speaker Wires	Transformer / Power Switch Wires

TRANSFORMER REPLACEMENT

The TRM6.1 is available both 120V and 230V versions. If it is necessary to perform service on the amplifier, be sure to check connections to the transformer before re-applying power and/or re- assembling the unit.

CAUTION: Reconnect wires as indicated in diagram!

MODEL TRM6.1	MODEL TRM6.1CE
120V 50Hz VAC	230V 50/60Hz VAC

– 25 –