Qualified Service Personnel Only
TWEETER REPLACEMENT
1.Remove (4) screws from wave guide using a 3/32" Allen Wrench
2.Remove wave guide assembly from enclosure
3.Disconnect the LED harness (FIG. 1)
4.Disconnect the (2) speaker wires from the tweeter (FIG. 2)
5.Disconnect the (2) power switch wires (FIG. 3)
6.Unclip the tweeter from wave guide (4 catch fingers)
7.Position the replacement tweeter into wave guide
8.Snap the tweeter into wave guide
9.Follow steps
CAUTION: Reconnect wires as indicated in each diagram! | Wave Guide Assembly |
|
|
|
|
FIG. 1 | FIG. 2 | FIG. 3 |
LED Harness | Tweeter Replacement #SPK10424 | Power Switch |
|
|
|
|
|
|
WOOFER REPLACEMENT
1.Remove (4) screws from woofer using a 3/32" Allen Wrench
2.Remove woofer from enclosure
3.Disconnect (2) speaker wires (FIG. 4)
4.Follow steps
CAUTION: Reconnect wires as indicated in each diagram!
FIG. 4
Woofer Replacement
– 24 –