Notice - Important Safety Information

NOTICE - IMPORTANT SAFETY INFORMATION

C A U T I O N

RISK OF ELECTRIC SHOCK	!
DO NOT OPEN

WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol within an equilateral trian- gle is intended to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure, that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1.READ INSTRUCTIONS

All the safety and operating instructions of your Hafler equipment should be read before power is applied to the equipment.

2.RETAIN OWNER'S MANUAL

These safety and operating instructions should be retained for future reference.

3.HEED WARNINGS

All warnings on the equipment and in the operating instructions are important and should be followed.

4.FOLLOW INSTRUCTIONS

All operating and use instructions are important and should be followed.

5.HEAT

The equipment should be kept away from areas of high temper- ature, i.e., heater vents, radiators, stoves/ovens, fireplaces, etc.

6.VENTILATION

The equipment should be used in an area suitable for proper ven- tilation. Care should be taken not to impede airflow in and around the cabinet.

grounded connection. It is important that the blades of the equip- ment’s plug be able to fully insert into the mating receptacle.

Never remove the round grounding pin on the plug in an attempt

to mate to a two wire ungrounded receptacle: use a grounding adaptor with the grounding tab or wire suitably connected to earth ground.

11.NON-USE PERIODS

During periods of extended non-use, the power cord should be unplugged from the power source.

12.CLEANING

The equipment should be cleaned only as detailed in the operat- ing instructions.

13.OBJECT AND LIQUID ENTRY

Care should be taken so that objects and/or liquids, such as clean- ing fluids or beverages, are not spilled into the enclosure of the equipment.

14.DAMAGE REQUIRING SERVICE

Hafler equipment should be serviced by qualified service person- nel when:

7.	WATER AND MOISTURE	A. The power supply cord or plug has been damaged, or

The equipment should not be used in or around water, such as a bathtub, sink, or swimming area. Also, the equipment should not be used in areas prone to flooding, such as a basement.

B.Objects have fallen onto, or liquid has been spilled into the equipment, or

8. POWER SOURCES	C. The equipment has been exposed to rain, or
The equipment should be connected only to a power source of
the same voltage and frequency as that listed on the rear panel	D. The equipment does not appear to operate normally or
above the power cord entry point.	exhibits a marked change in performance, or

9.	POWER CORD PROTECTION		E. The equipment has been dropped, or the enclosure has
	Power cords should be arranged so they do not interfere with the		E. The equipment has been dropped, or the enclosure has
			been damaged.
	movement of objects in the room: people, fan blades, utility		been damaged.

	carts, etc. Also, care should be taken that the cord is not pinched	15.	SERVICING
	or cut, and placed so it is not in danger of being pinched or cut,		The user should not attempt to service the equipment beyond that
	as in under a rug, around a tight corner, etc.		which is described in the operating instructions. All other service
10.	POWER CORD GROUNDING		should be referred to qualified service personnel.
10.	POWER CORD GROUNDING
	The power supply cord is of a three wire grounded type, designed	16.	CARTS AND STANDS
	to reduce the risk of electric shock sustained from a live cabinet.		The equipment should be used with carts or stands only of suffi-
	It is assumed to be of suitable length for most uses of the equip-		cient strength and stability for the use intended. An equipment
	ment. The use of extension cords and power strips is discouraged		and cart combination should be moved with care. Quick stops
	unless they are of suitable rating to deliver the required total cur-		and starts, excessive force, and uneven surfaces may cause the
	rent for safe operation of all connected equipment. Furthermore,		equipment and cart combination to topple.
	extension cords or power strips must provide the same three wire

– ii –