Chapter 3 — Operation
Peel-Off Operation
1Open the printer's top cover by pressing the release buttons on both sides and folding the cover upwards/rearwards.
2Open the
3Pull up the spindle and remove possible remaining labels or empty label roll core.
4Place the spindle into the core of a fresh label roll. Rotate the spindle according to the inner diameter of the label roll core (see markings on the spindle).
5Wind the green edge guide wheel towards the front of the printer so you can fit the label roll between the guides.
6Place the label roll and spindle in the media compartment and snap the spindle into the slots on either side.
EasyCoder PC4 User’s Guide | 21 |