Genicom PC4 manual Printable Area, Media, Thermal Transfer Ribbons, Printing Speed, Sensors

	Appendix A — Technical Data
Printable Area
Width, max at 203.2 dpi	108.0 mm	(4.25 inches)
Width, max at 300 dpi	102.2 mm	(4.02 inches)
Length, max. (203.2 dpi):	1,140 mm	(45 inches)
Length, max. (300 dpi):	760 mm	(30 inches)
Media
Roll Diameter, max:	125 mm	(5 inches)
Core Diameter, min/max:	25.4/38.1 mm	(1.0/1.5 inches)
Media Width, max:	116.0 mm	(4.57 inches)
Media Width, min.	25.4 mm	(1.0 inches)
Label Length, min:	6.35 mm	(.25 inches)
Max. Thickness, rolls:	0.15 mm	(.0006 inches)
Max. Thickness, fan-folds:	0.17 mm	(0.006 inches)
Min. Thickness, all:	0.06 mm	(.003 inches)

Thermal Transfer Ribbons

Intermec transfer ribbons only (wax, hybrid, and resin) in widths of 33, 60, 63.5, 83.5, 89, and 110 mm (1.33, 2.36, 2.5, 3.29, 3.5, and 4.33 inches) centered on 110 mm (4.33 inches) wide cardboard cores.

Core inner diameter:	13 mm	(0.5 inches)
Max. ribbon roll diameter:	41 mm	(1.6 inches).
Ink coated side facing outwards, cores with notches
Printing Speed
8 dots/mm	30, 40, 50, 75, or 100 mm/sec.
	(1.2, 1.6, 2, 3, or 4 inches/sec.)
11.81 dots/mm	30, 40, or 50 mm/sec.
	(1.2, 1.6, or 2 inches/sec.)

Sensors

Label gap, label mark, label taken, out-of-media, ribbon end, print frame open/closed.

Print Directions

Text, bar codes, and graphics can be printed in four directions.

Fonts

5 resident alphanumeric fonts (can be magnified up to 8 times horizontally and 9 times vertically)

EasyCoder PC4 User’s Guide 37