Insert the original once more into the
document bay, making sure it faces the same direction. Press the start/ stop key to begin printing the right side of the original.
Note that the two halves will not be aligned properly if the original is not placed correctly into the document bay.
The right half of the original will then be
printed. When the printing process is complete, cut the print with the cutter.
cutting mark
When printing in divisions, cutting marks are automatically printed on the output.
Paste the two sides of the print together to form a single poster.
|
|
|
|
|
|
|
|
|
|
|
|
| 5 |
|
|
|
|
|
| |
If you wish to print only the right side of |
| |||||
the original, press the output size key |
|
| ||||
until 44x58 |
| appears on the message |
|
| ||
|
|
| ||||
display, and then press the start/stop key. |
|
| ||||
|
|
|
|
|
|
|
Pasting two output sheets together
1.Cut away or fold back the excess margin area of the first sheet, using the cutting marks provided as a guide.
2.Align the first output sheet with the second one so that the edge of the first is against the cutting marks of the second, and so the printed images of both halves are properly lined up. Once one sheet has been laid over the other, fix lightly into place by applying tape to both ends of the output sheets.
3.Apply a longer strip of tape over the tapes first applied and cut away any excess when both halves of the output have been fixed together.
•Discoloration and fading may result depending on the type of tape used.
•The cutting marks are to be used as guides when cutting.
•If the left and right sides do not align properly, adjust the image of one side so that they do.
Cut or fold
Lightly apply tape to hold in place
Apply tape to fix into place
19