FujiFilm 3000 manual Setting the left paper bracket, Setting the bracket in the printer

Page 15

end cap

Cut the paper.

Move the cutter in a downward horizontal sliding motion while holding the paper out from the printer.

PROPER USE OF THE CUTTER

Lightly press down on the cutter lever while holding the edge of the paper underneath it.

Setting the left paper bracket

Setting the bracket in the printer

Install part A of the bracket according to the paper size label marks, in order 1 2

3

Move the cutter unit in a sliding motion towards the right to cut the paper.

Using force on the paper cutter has no advantageous effect. Pressing down lightly is sufficient. The cutter may be used from either direction.

Caution

When the printer cover is open, pressing down on the paper cutter lever will cause the blade to protrude.

Exercise due care to avoid cutting yourself.

Adjusting the left paper bracket

If the paper (with end caps attached) does not fit properly in the paper bracket, loosen the adjustment knob and move the paper bracket so that the paper can be installed

2

adjustment knob

left paper bracket

A

1

properly.

correct set position

left paper bracket

thermal paper

paper size label

adjustment knob

13

Image 15

Contents USER’S Guide FCC IntroductionContents Unpacking the Printer Checklist of Items Included in PackageConnecting the Power Cord Installation SpaceDo not damage, crease or fold the power cord Safety PrecautionsGrounding Instructions for Proper USE of the Printer Variety of paper types and colors are available Main Features of the PosterprinterIndividual Part Names Front ViewRear View Printer ScannerFunction Control PanelMode Output SizeContrast Paper remaining from the tip of the mark Installing PaperCorrect set position Setting the left paper bracketSetting the bracket in the printer Adjusting the left paper bracketBasic Functions Printing in Normal ModeWhat to do when a ‘document jam’ error occurs Points to note when using photo mode Printing in Photo ModePoints to note when using reverse mode Printing in Reverse ModeDivision Printing Using A123 paper to produce a 44x58 size posterPasting two output sheets together Printing Posters Smaller than the Paper Size Using A123 paper to produce a 20x27 size posterPoints to note in printing banners Printing Banners from Long Input DocumentsAdditional Functions Function ModeSetting Functions Checking Current SettingFunction mode Setting the Amount of Remaining Paper Remaining Paper ModePrinting the Amount of Remaining Paper Checking the Amount of Remaining PaperPrinting Area Scanning AreaThermal Transfer Paper TTP SuppliesDescription Direct Thermal Paper DTPThermal Transfer Paper TTP / Heavy Duty Poly Paper HDP Points Common to All Types of PosterPrinter SuppliesTroubleshooting Error Messages and ResponsesError Message Description Response Troubleshooting Problem Description and RemediesDescription Remedy P29 Problem Part to Clean Cleaning the PrinterPlaten glass Power supply Scanning resolutionPrinting resolution Dimensions/weightIndex 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan