FujiFilm 3000 manual Remaining Paper Mode, Setting the Amount of Remaining Paper

Page 26

REMAINING PAPER MODE

Use the remaining paper mode to check how much paper remains on the roll in use. In addition, if the paper roll is changed midway, the amount of remaining paper can be printed on the roll for future reference.

Setting the Amount of Remaining Paper

Press the clear key for at least 3 seconds.

press for at least

3 seconds

			The ‘INPUT RESIDUAL’ screen will be
			displayed. Input the amount of
			remaining paper.
	6		remaining paper.



			For new rolls of direct thermal paper:
			Each time the paper type key is pressed, the display shows
			Each time the paper type key is pressed, the display shows
			‘85’ or ‘98’. Input 98 feet.
			For new rolls of thermal transfer paper or HDP paper:
			Each time the paper type key is pressed, the display shows
			‘85’ or ‘98’. Input 85 feet.
			For rolls of paper that are already used:
			Input the amount using the mode key (-) and contrast key (+).
			Each time either key is pressed, the number advances 1ft.
			further in that direction.

The ‘RESIDUAL’ screen in remaining paper mode will be displayed. Press the start/stop key.

Press the start/stop key to store the input data.

'H' (hold) will be displayed.

Press the start/stop key for at least 3 seconds to revert to the ‘RESIDUAL’ screen in remaining paper mode.

Press the clear key for at least 3 seconds to revert to the original message display.

press for at least	press for at least
3 seconds	3 seconds

24

Image 26

Contents USER’S Guide Introduction FCCContents Checklist of Items Included in Package Unpacking the PrinterInstallation Space Connecting the Power CordSafety Precautions Do not damage, crease or fold the power cordGrounding Instructions for Proper USE of the Printer Main Features of the Posterprinter Variety of paper types and colors are availableRear View Individual Part NamesFront View Scanner PrinterControl Panel FunctionContrast ModeOutput Size Installing Paper Paper remaining from the tip of the markAdjusting the left paper bracket Setting the left paper bracketSetting the bracket in the printer Correct set positionPrinting in Normal Mode Basic FunctionsWhat to do when a ‘document jam’ error occurs Printing in Photo Mode Points to note when using photo modePrinting in Reverse Mode Points to note when using reverse modeUsing A123 paper to produce a 44x58 size poster Division PrintingPasting two output sheets together Using A123 paper to produce a 20x27 size poster Printing Posters Smaller than the Paper SizePrinting Banners from Long Input Documents Points to note in printing bannersFunction Mode Additional FunctionsFunction mode Setting FunctionsChecking Current Setting Remaining Paper Mode Setting the Amount of Remaining PaperChecking the Amount of Remaining Paper Printing the Amount of Remaining PaperScanning Area Printing AreaDirect Thermal Paper DTP SuppliesDescription Thermal Transfer Paper TTPPoints Common to All Types of PosterPrinter Supplies Thermal Transfer Paper TTP / Heavy Duty Poly Paper HDPError Message Description Response TroubleshootingError Messages and Responses Description Remedy TroubleshootingProblem Description and Remedies P29 Cleaning the Printer Problem Part to CleanPlaten glass Dimensions/weight Scanning resolutionPrinting resolution Power supplyIndex 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan