FujiFilm 3000 manual Cleaning the Printer, Problem Part to Clean

Page 34

CLEANING THE PRINTER

If one of the following problems occurs, clean the printer parts outlined below.

Problem	Part to Clean
1 The paper does not feed properly	Paper feed roller

2The printer makes a rattling or grating noise during printing Shuttle shaft

3	Horizontal lines appear periodically on the printed image	Thermal heads
4	Vertical lines appear on the printed image	Platen glass
5	The original is not scanned properly	Document feed rollers, platen roller,
		document eject rollers

PRINTER

thermal heads

shuttle shaft

heater element

paper feed roller

platen rubber cutter base

Paper feed rollers

Wipe with a soft cloth moistened with water. Wipe again with a soft, dry cloth.

Platen rubber/cutter base

Wipe with a soft, dry cloth.


10		Caution
		Be careful not to damage the platen rubber.
		Avoid wiping the platen rubber with alcohol or
		other solvents.

Shuttle shaft

If the shaft becomes dirty, the printer will not function properly. Wipe the shaft carefully with a soft cloth.

Thermal heads

When the thermal heads have cooled (at least 2 minutes after the printer has been switched off) wipe the heater element vertically with a soft, dry cloth.

If the thermal heads are particularly dirty, apply a small amount of isopropyl alcohol to the cloth. (Never touch the print heads directly with your hands.)

32

Image 34

Contents USER’S Guide Introduction FCCContents Checklist of Items Included in Package Unpacking the PrinterInstallation Space Connecting the Power CordSafety Precautions Do not damage, crease or fold the power cordGrounding Instructions for Proper USE of the Printer Main Features of the Posterprinter Variety of paper types and colors are availableFront View Individual Part NamesRear View Scanner PrinterControl Panel FunctionOutput Size ModeContrast Installing Paper Paper remaining from the tip of the markAdjusting the left paper bracket Setting the left paper bracketSetting the bracket in the printer Correct set positionPrinting in Normal Mode Basic FunctionsWhat to do when a ‘document jam’ error occurs Printing in Photo Mode Points to note when using photo modePrinting in Reverse Mode Points to note when using reverse modeUsing A123 paper to produce a 44x58 size poster Division PrintingPasting two output sheets together Using A123 paper to produce a 20x27 size poster Printing Posters Smaller than the Paper SizePrinting Banners from Long Input Documents Points to note in printing bannersFunction Mode Additional FunctionsChecking Current Setting Setting FunctionsFunction mode Remaining Paper Mode Setting the Amount of Remaining PaperChecking the Amount of Remaining Paper Printing the Amount of Remaining PaperScanning Area Printing AreaDirect Thermal Paper DTP SuppliesDescription Thermal Transfer Paper TTPPoints Common to All Types of PosterPrinter Supplies Thermal Transfer Paper TTP / Heavy Duty Poly Paper HDPError Messages and Responses TroubleshootingError Message Description Response Problem Description and Remedies TroubleshootingDescription Remedy P29 Cleaning the Printer Problem Part to CleanPlaten glass Dimensions/weight Scanning resolutionPrinting resolution Power supplyIndex 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan