Press the contrast key to select the level of contrast desired.
Place the original into the document bay face down.
Make sure the original is placed firmly along the document guide closest to you, and into the scanner until it stops.
Press the start/stop key to scan the original. The printing process will begin.
4
When the printing process is complete, cut the print with the paper cutter.
Move the cutter in a downward horizontal sliding motion while holding the paper out from the printer.
If you wish to stop printing
What to do when a ‘document jam’ error occurs
1. Open the scanner cover to remove the original.
2. Reinsert the original until it stops, and press the start/stop key.
If the original is not placed into the scanner until it stops, an error may occur.
15