Manuals / Xerox / Computer Equipment / All in One Printer

Xerox 32N00467 manual Options” on page 5-22 for more information, the LSU Laser Scanning, Unit

Models: 32N00467

1 192

Download 192 pages 17.41 Kb

Page 172

Troubleshooting	DISPLAY	MEANING	SOLUTION
	DISPLAY	MEANING	SOLUTION

	Non-Xerox Toner Cart	You have used an	You must use a Xerox approved cartridge.
		unauthorized toner
		cartridge.

	Operation Not Assigned	The machine has no job
		to handle.

	Line Busy	The remote fax did not	Try again. Contact recipient to ensure remote
		answer.	machine is functioning correctly.

	Line Error	Your machine cannot	Try again. If the problem persists, wait an hour
		connect with the remote	or so for the line to clear, then try again.
		machine, or has lost	Or, turn the ECM mode on. Refer to “Fax Setup
		contact because of a	Or, turn the ECM mode on. Refer to “Fax Setup
		contact because of a	Options” on page 5-22 for more information.
		problem with the phone	Options” on page 5-22 for more information.
		problem with the phone
		line.

	LSU Error	A problem has occurred in	Try Power Off / Power On. Refer to “Powering
		the LSU (Laser Scanning	On the Machine” starting on page 2-16. If the
		Unit).	problem still persists, please call for service.

	Memory Full	The memory is full	Either delete unnecessary documents,
			retransmit after more memory becomes
			available, or split the transmission into more
			than one operation.

	No Answer	The remote fax machine	Try again. Contact recipient to ensure remote
		has not answered after	machine is functioning correctly.
		several redial attempts.

	Poll Code Err.	You have used an
		incorrect poll code.

	Polling Error	The remote fax machine	The remote operator should know in advance
		you want to poll is not	that you are polling and have the fax machine
		ready to respond to your	loaded with the original document.
		poll.	Enter the correct poll code.
			Enter the correct poll code.
		Or, when setting up to poll
		another fax machine, you
		have used an incorrect
		poll code.

	No Developer Cartridge	The toner cartridge is not	Install the toner cartridge. Refer to “Toner
		installed.	Cartridge” on page 9-5.

Page 10-12

Xerox WorkCentre 4118 User Guide

Image 172

Xerox 32N00467 manual Options” on page 5-22 for more information, the LSU Laser Scanning, Unit, Cartridge” on page

Contents

User Guide WorkCentre32N00467 Prepared and Translated by Xerox GKLS European Operations Bessemer RoadWelwyn Garden City Hertfordshire AL7 1BU ENGLAND 2006 by Xerox Corporation. All rights reserved1 Welcome Table of Contents2 Getting Started 3 Copy 4 Paper and Other Media5 Fax 4 in 1 only 4 in 1 Control panelPrint Machine Administration7 Scan 4 in 1 only 9 Maintenance 10 Troubleshooting11 Specifications 10-112 Index Fax SpecificationsScanner and Copier Specifications General SpecificationsPage Xerox WorkCentre 4118 User Guide¾ Customer Support ¾ Safety Notes ¾ Regulatory Information 1 Welcome¾ Introduction ¾ About This Guide ¾ Related Information Sources ¾ Environmental Compliance ¾ Illegal CopiesIntroduction Xerox WorkCentre 4118pXerox WorkCentre WelcomeAbout This Guide feature mode or keyfeature Provides more in-depth specificationThis User Guide The Quick Use Guide The Quick Install Sheets The System Administration GuideRelated Information Sources WelcomeCustomer Support WelcomeXerox US Welcome Center Xerox Canada Welcome CenterSafety Notes Warning MarkingsElectrical Supply WelcomeElectrical Safety Information Operator Accessible AreasMaintenance Cleaning Your ProductOperational Safety Information Disconnect DeviceDo These WelcomeMaintenance Information Ozone Safety InformationDo Not Do These WelcomeLaser Safety Information ConsumablesRadio Frequency Emissions United States, Canada, Europe, Australia/New ZealandProduct Safety Certification WelcomeAGENCY STANDARDRegulatory Information FAX FunctionCE Mark WelcomeWelcome Data Coupler InformationCANADA WelcomeWelcome EUROPERadio Equipment & Telecommunications Terminal Equipment Directive Environmental Compliance CanadaEurope WelcomeIllegal Copies WelcomeWelcome Canada¾ Passports. Foreign Passports may be photographed Other countries WelcomeProduct Recycling and Disposal European UnionDomestic/Household Environment Professional/Business EnvironmentNorth America Other CountriesWelcome Xerox WorkCentre 4118 User GuidePage WelcomeXerox WorkCentre 4118 User Guide ¾ Unpacking ¾ Machine Overview ¾ Installing Drum and Toner Cartridges ¾ Making Connections ¾ Powering On the Machine ¾ Loading Paper¾ Machine Setup ¾ Installing Software 2 Getting StartedUnpacking Getting StartedCD Contents User Guide CDGetting Started Xerox WorkCentre 4118 User GuideNuance CD Drivers CDGetting Started CD Installation User Guide CDDrivers CD Nuance CDModels and Options Machine OverviewGetting Started Front View Component LocationGetting Started Rear View Document Feeder Connector Telephone Connections AC Power CordConnector Power Switch Parallel Connector USB Connector Getting StartedControl Panel Overview 2 in 1 Control panel4 in 1 Control panel Getting StartedGetting Started 5 Original Type Used to select the type of original being scannedStarted GettingInstalling Drum and Toner Cartridges Getting Started¾ Pull the release latch to open the ¾ Open the front coverGetting Started ¾ Remove the starter toner cartridge from its bagMaking Connections 1 Document Feeder2 Telephone Line WorkCentre 4118, 4 in 1 only Getting Started3 USB or Parallel Port Cable CAUTION Shut down the computer before connecting the cableGetting Started Xerox WorkCentre 4118 User GuidePowering On the Machine ¾ Connect the AC Power Cord tothe machine and a power outlet The power cord must be plugged into a grounded power socketLoading Paper Getting StartedRear GuideGetting Started ¾ Fan the paper and insert it into the trayCorner snubbers ¾ Do not fill above the Maximum Fill LineGetting Started Do not allow the guide to press against the edge of the paper tightlyGetting Started Machine SetupStatus Machine Setup Options Getting StartedStarted or OffFast NameEnter the current date and time using the Numeric Keypad. Use Clock Mode to setIf the Fax Setup option Auto Reduction is set to StartedInstalling Software Installing DriversSystem Requirements Programs for WindowsInstalling Drivers in Windows MacintoshLinux Started¾ Choose the components you want to install and then click Next Click Next to install your selections6 ¾ When the setup has completed click Finish Getting StartedGetting Started Page¾ Choose the components you want to install and then click Next ¾ Click Finish. The driver installation is now completeGetting Started Pagefor the WorkCentre Getting StartedWorkCentre Click Next when prompted then click Finish Getting StartedGetting Started ¾ Choose Yes to print a test page and click FinishTest Print or Scan Test PrintTest Scan Getting Started¾ Copying Procedure ¾ Basic Copy Features ¾ Special Copy Features ¾ Compatible Features3 Copy Digital copying is available as standard on the Xerox WorkCentreCopying Procedure 1 Select Copy Mode2 Select the Paper Supply CopyDocument Feeder optional on the 2 in 3 Load the OriginalsCopy Select the Copy Features Document GlassCopy ¾ Lower the Document Feeder or Document CoverEnter the Quantity Press StartCopy ¾ If the Document Glass is usedBasic Copy Features Feature DescriptionCopy Reduce/Enlarge from¾ Continue the procedure until all the originals have CopyAuto Fit displays sided copies are requiredCopy Original TypeColor Original Paper SupplyFeature Description Special Copy FeaturesCopy z Use to ’clean up’ CopyEdge Erase Margin ShiftSuppress feature CopyBook Copy Auto SuppressBooklet feature CopyTransparencies Create BookletCopy Compatible FeaturesXerox WorkCentre 4118 User Guide Page CopyXerox WorkCentre 4118 User Guide ¾ Loading Paper ¾ Setting the Paper Size ¾ Media Specifications 4 Paper and Other MediaXerox WorkCentre4118 User Guide PageUsing the Paper Trays Preparing Paper for LoadingLoading the Paper Trays Paper and Other MediaPaper and Other Media Paper and Other Media positioned under the snubbersUsing the Bypass Tray Paper and Other MediaPaper and Other Media Loading the Bypass TrayPaper Support Bypass Tray Paper and Other Media Bypass Tray is lit on the Status Map¾ To select the Bypass Tray, press Xerox WorkCentre4118 User GuideSetting the Paper Size Paper and Other MediaMedia Sizes and Types Media SpecificationsPaper and Other Media Paper and Other Media ¾ Use only well-constructed envelopes with sharp, well creased foldsPaper and Other Media ¾ Ensure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine componentsPage Paper and Other MediaXerox WorkCentre4118 User Guide ¾ Faxing Procedure ¾ Dialing Methods ¾ Basic Fax Features ¾ Special Fax Features ¾ Fax Forwarding ¾ Mailbox Setup¾ Mailbox Procedures ¾ Fax Setup Options 5 Fax 4 in 1 onlyFaxing Procedure 1 Load the OriginalsDocument Feeder Fax 4 in 1 onlySelect the Fax key Document GlassFax 4 in 1 only ¾ Lower the Document Feeder3 Select the Fax Features 4 Enter the Fax Number1 only Fax 4 in6 Job Status Press StartFax 4 in 1 only KeysDialing Methods Fax 4 in 1 only¾ Dial the fax number. When the fax tone is heard, press Start to 1 onlyManual group dialing Manual DialingFeature Description Basic Fax FeaturesFax 4 in 1 only Super Fine resolution 1onlyAlso used when sending a Special Fax Features Feature Description¾ Using the Navigation keys select Fax Features Fax 4 in 1 only1only Delay FaxMemory Fax only1 Priority FaxPolling TX PollBatch TX 1onlySecure Receive Fax Forwarding Fax 4 in 1 onlyOff - don’t forward RX - forward received TX - forward transmitted All - forward RX and TXMailbox Setup Create a MailboxSetConfMBX confidential SetBullMBX bulletinFax 4 in 1 only Delete a MailboxTo delete a mailbox Storing Documents in a Mailbox Mailbox ProceduresFax 4 in 1 only Printing Mailbox Contents ¾ Using the Navigation Keys select Mailbox and press EnterFax 4 in 1 only ¾ Press the Menu/Exit keyDeleting Mailbox Contents ¾ Using the Navigation Keys select Mailbox and press EnterFax 4 in 1 only ¾ Press the Menu/Exit keyPolling from a Mailbox Fax 4 in 1 onlySending to a Mailbox Fax 4 in 1 onlyChanging the Fax Setup Options Fax Setup OptionsFax 4 in 1 only Fax 4 in 1 only Fax Setup OptionsDRPD Speed Dials Fax 4 in 1 onlyEdit Group Dials Fax 4 in 1 onlyMSG Confirm Receive Mode is set to Ans/Fax onlyUse to activate the machine performing an 4 in see DRPD Mode on the bottom line andonly1 until youPage Fax 4 in 1 onlyXerox WorkCentre 4118 User Guide ¾ Printing a Document ¾ Printer Settings ¾ PCL Driver 6 PrintXerox WorkCentre 4118 User Guide PagePrinting a Document PrintPrinter Settings Accessing Printer SettingsWindows 98/Me Windows NTWindows XP Print¾ Select File Print Properties from within any Windows application PagePCL Driver PrintPrint Layout TabRotate 180 Degrees Paper Tab Printmenu Use to select whether a banner page is requiredImage Options Tab Print Quality ModeToner Save Mode PrintOutput Options Tab PrintIf this option is selected the fonts which are resident on the printer will be used for the jobWatermark Tab PrintWatermark Message Message AngleAbout Tab PrintXerox WorkCentre 4118 User Guide PagePage PrintXerox WorkCentre 4118 User Guide ¾ TWAIN Scanner Program ¾ TWAIN Scanning Procedure ¾ Scanning Using the WIA Driver7 Scan 4 in 1 only Xerox WorkCentre 4118 User GuideTWAIN Scanner Program Scan 4 in 1 onlyTWAIN Scanning Procedure 1 Open the Image Editing Application23 Load the Originals Document Feeder3 Select the Scan Features Document GlassScan 4 in 1 only ¾ Lower the Document Feeder4 Select Preview 5 Select Scan6 Save the Image Scan 4 in 1 onlyWIA Scanning Procedure Scanning Using the WIA DriverScan 4 in 1 only Xerox WorkCentre 4118 User Guide Scan 4 in 1 onlyPage Page Scan 4 in 1 onlyXerox WorkCentre 4118 User Guide 8 Machine Administration Reports Machine AdministrationReports Available Printing Reports Machine Administration¾ Press the Machine Status key Xerox WorkCentre 4118 User GuideInstalling ControlCentre Using ControlCentreControlCentre Running ControlCentreFirmware Update Tab Phonebook Tab 4 in 1 onlyMachine Administration Retrieves thePrinter Tab PCL ButtonMachine Administration PagePasscode Protection Enable Passcode ProtectionMachine Administration Change the Passcode Machine AdministrationThis will be blank if you have just enabled Passcode Protection ¾ Enter the new passcode and press EnterClear Memory Clearing the MemorySystem Data Fax Phone Book Fax RX History Fax TX History Machine AdministrationCheck the Serial Number Maintenance ToolsMachine Administration Notify Toner Low New DrumYour Customer Number Your Customer Name The Supplier’s Fax Number The Suppliers NameBilling Counters Clean DrumMachine Administration Enabling or Disabling Auxiliary Access Machine AdministrationPage Machine AdministrationXerox WorkCentre 4118 User Guide 9 Maintenance ¾ Cleaning ¾ Ordering Supplies ¾ Customer Replaceable UnitsXerox WorkCentre 4118 User Guide PageCleaning Cleaning the Document Glass and Constant Velocity Transport CVT GlassMaintenance ¾ Open the Document FeederOutside Areas of the Machine Control Panel and LCDMaintenance Ordering Supplies MaintenanceCUSTOMER REPLACEABLE UNITToner Save Mode Customer Replaceable UnitsToner Cartridge Expected Cartridge LifeMaintenance To Re-distribute the Toner¾ The display shows New Toner?, select No and press Enter Maintenance Setting the Product to Send Toner Low InformationXerox WorkCentre 4118 User Guide Replacing the Drum Cartridge Drum CartridgeMaintenance Maintenance Maintenance The machine returns to Standby modeReinstall the toner cartridge, then lock the lever ¾ Close the front cover and the side cover10 Troubleshooting ¾ General ¾ Fault Clearance ¾ Customer Support ¾ LCD Error Messages¾ Problem and Solutions Charts Xerox WorkCentre 4118 User GuideTroubleshooting GeneralFault Clearance Document JamsInput Misfeed TroubleshootingExit Misfeed TroubleshootingFeeder ¾ Close the Document Feeder top coverRoller Misfeed Troubleshooting¾ Open the Document Feeder ¾ Close the Document Feeder and reload the documentsPaper Feed Area Paper JamsTroubleshooting Troubleshooting Paper Exit AreaXerox WorkCentre 4118 User Guide Troubleshooting ¾ Gently pull the paper out through the exit area¾ Push the Fuser Lever up ¾ Turn the Jam Remove Lever back to the original positionBypass Tray Jam 2 Sided JamTroubleshooting Troubleshooting Customer SupportXerox US Welcome Center Xerox Canada Welcome CenterLCD Error Messages TroubleshootingTray Jams” on pageOptions” on page 5-22 for more information the LSU Laser ScanningOn the Machine” starting on page 2-16. If the Unit10-6 10-6page The Toner Cartridge hasProblem and Solutions Charts Copying ProblemsTroubleshooting “Cleaning the Document Glass and Constant Velocity TransportPrinting Problems that work. If printing is still not possible, replaceChange the page orientation in the printer setup port, enable this mode of operation. Refer to theEnabling High Speed Printer Communications If the computer is equipped with an ECP parallelTroubleshooting Faxing Problems Solution ChartToner Cartridge Check with the party sending the original that the original is a 11 Specifications ¾ Introduction ¾ Printer Specifications ¾ Fax Specifications¾ Scanner and Copier Specifications ¾ General Specifications ¾ Media SpecificationsSpecifications IntroductionPage Xerox WorkCentre 4118 User GuidePrinter Specifications SpecificationsFax Specifications SpecificationsSpecifications Scanner and Copier Specifications600 x 300 Document Feeder Specifications General Specifications32 kg Drum and Toner Cartridges included Media Specifications SpecificationsPlain paper, OHP film, Label, Envelope, Card, Postcard Paper TypeB5 means JIS and ISO Transparency film thickness 150 µm SpecificationsPaper Label thickness 140 µm Numerics IndexIndex Index Index Index Canada 1-5 US 1-5 IndexXerox WorkCentre 4118 User Guide IndexIndex IndexXerox WorkCentre 4118 User Guide