Xerox 32N00467 manual Clone, Auto Fit, Sided, Long, Short

	Clone	Use to print multiple	¾ Press [Copy].	Copy
		images on a single sheet	¾ Press [Reduce/Enlarge].
		of paper. The number of
		images produced is	¾ Using the Navigation Keys, select [Clone] and
		determined automatically	press [Enter].
		based on the original	Clone displays.
		image size.
		z Only available using the
		Document Glass, ensure
		the Document Feeder is
		empty.
	Auto Fit	Use to reduce or enlarge	¾ Press [Copy].
		the image to fit the paper	¾ Press [Reduce/Enlarge].
		size automatically.
		z Only available using the	¾ Using the Navigation Keys, select [Auto Fit] and
			press [Enter].
		Document Glass, ensure
		the Document Feeder is	Auto Fit displays.
		empty.
1-2 Sided	1-1 Sided	Use when originals are	¾ Press [Copy].
z Use to produce		printed on 1 side and 1-	¾ Press [2 Sided].
		sided copies are required.
1 or 2 sided copy			¾ Use the Navigation Keys to select the option
output from 1	1-2 Sided	Use when originals are
sided originals.			required and press [Enter] to save the selection.
	Long	printed on 1 side only and
			¾ If necessary, use the [Scan Side 2] option to scan
		2 Sided copies, with the
		conventional "head to	side 2. Position side 2 on the Document Glass
		head" layout are required.	and select [Yes] then [Enter] to scan side 2.
			¾ Continue the procedure until all the originals have
	1-2 Sided	Use when originals are
	Short	printed on 1 side only and	been scanned.
		2 Sided copies, with the	¾ Select [No] when all the originals have been
		"head to toe" layout are	scanned, and press [Enter].
		required.
Collated	On	Use to produce collated	¾ Press [Copy].
z Use to produce		output e.g. 2 copies of a 3	¾ Press [Collated].
		page job will print one
collated copy		complete document,	¾ Use the Navigation Keys to select [On] and press
sets.
		followed by the second	[Enter].
		complete document.

Xerox WorkCentre 4118 User Guide Page 3-7