Eurotech Appliances CPU-1461 Primary and secondary EIDE, Video Controller, AC97 Controller

Page 33
Primary and secondary EIDE

PC/104-PlusCPU-1461 Module

33

 

 

 

 

Primary and secondary EIDE

This option enables or disables the on-board EIDE hard disk controllers. For example, if an external hard disk controller needs to be used, the internal one must be disabled.

Option

Description

Note

Disabled

Disable the on-board hard disk controller

An external controller can be used

Enabled

Enable the on-board hard disk controller

 

Video Controller

The on-board Video Controller can be automatically disabled if another one is found in the system; otherwise the on-board video controller can be forced anyway, even if another controller is present.

Option

Description

Note

Replace with Add-On if any

If an external controller is found, it is used

 

Always use Integrated

In any case the on-board controller in used

 

AC97 Controller

The on board AC97 controller can be enabled or disabled

Network

In PCI system the user can manually enables or disables the on-board network adapter.

Option

Description

Note

Disabled

Disable the on-board network controller

 

Enabled Device only

Enable the on-board network controller

 

Enabled device and Firmware

Enable the on-board network controller

 

 

and the Firmware in order to allow the boot

 

 

from network

 

PS/2 Mouse

If not used, the PS/2 mouse can be disabled. In this way the interrupt IRQ 12, normally reserved for mouse, is free for PCI bus or other devices.

Note: the interrupt reserved for mouse is fixed (IRQ 12); it is displayed for information only.

Option

Description

Note

Disabled

Disable the on-board mouse controller

 

Enabled

Enable the on-board mouse controller

 

Bridge MAC Address

This option allows configuring the hexadecimal values of the Bridge MAC Address.

Image 33
Contents EmbeddedDNA CPU-1461User’s Manual COPYRIGHT 1994-2005 Eurotech S.p.A. All Rights ReservedPC/104-Plus - CPU-1461 Module Conventions Environmental safetyImportant features or IconPage Multifunction Connector Section ContentsContents Connectors DescriptionChapter 6 Troubleshooting Chapter 5 Watch Dog TimerChapter 4 The Set-up Program AppendixChapter 1 Product Overview BIOS Flash Product DefinitionPower Supply ArchitectureChapter 2 Jumper Description Default Jumper Layout and ConfigurationJumper # TypeChapter 3 Connectors Description Note in figure 2, a red square pad indicates pin 1 of each connector Connectors LayoutJ14 J16 J17 J4J5Page J4 for Multifunction and VGA CPU-1461Carrier Module Multifunction Connector Section ƒ System reset The Eurotech Multifunction Adapterƒ External Battery ƒ SpeakerSupported CRT-VGA Video Resolutions VGA SectionIDE/DOM J5 IDE ConnectorUSB J7 for USB 2.0 Ports 5 andPower J9 Auxiliary Power ConnectorPower button input AuxiliaryThe Eurotech USB & AC97-Audio Codec Adapter J14 for USB 1.1 Ports 7 and 8 and Audio-CODECAux IN CD IN To J14 CPU Board ConnectorAux IN SpkPhone IN/OUTJ16 for USB 2.0 Ports 1to J17 for SERIAL1 and SERIAL2 Ethernet J20 for EthernetThe Eurotech Ethernet Transceiver To CPU Board NetConnectorRJ45 Connector Chapter 4 The Set-up Program Select “Quit” to exit from the Setup program Use the cursor arrow keys to move the highlight to other optionsPress the “ESC” key to return to the items of the Main menu The follow screen will be displayed General Page The Set-up pagesTime Quick BootDate Floppy disksDevices Page Boot Try SequenceFloppy Controller Video Controller Primary and secondary EIDEAC97 Controller NetworkSerial Ports 1 and Communications PageParallel Port VP2000 and VT100Parallel Port Mode ATAPI unit type Primary and Secondary ATAPI PageTranslation Mode PIO ModeCylinders HeadsDetect Now Advanced pagePCI Advanced Page ISA IRQLatency Time Devices ISA Bus Error Handling PageError on Video Error on KeyboardError on Floppy Disks Error on Fixed DisksPage This chapter explains how to use the Watch Dog timer Chapter 5 Watch Dog TimerHow to use the Watch Dog What is a Watch Dog?Use the System BIOS INT 52h functions How to turn the Watch Dog ONDirectly accessing Watch Dog I/O mapped registers How to turn the Watch Dog OFFUse the following code to Enable Watch Dog Use following code to refresh the Watch Dog Chapter 6 Troubleshooting Troubleshooting a PC/104 System Common Problems and SolutionsTechnical/Sales Assistance CPU Module doesn’t workftp//ftp.eurotech.it Returning For ServicePage Company Name Page Appendix Operating Characteristics A.1 Electrical and Environmental SpecificationsElectrical Operating Characteristics Backup Battery CharacteristicsMTBF Mean Time Between Failures Absolute Maximum RatingsThe CPU-1461 mechanical dimensions are shown in the following picture A.2 Mechanical Dimensions¾ Dimensions 90 X 96 mm 3.6”X3.8” CPU-1461 Board dimensionsEthernet Adapter Dimensions USB Audio Codec DimensionsMultifunction Adapter Dimensions A.3 Safety Summary62.0 12.0Observe Dangerous Procedure Warnings Use Caution When Exposing or Handling the CRTGround the Instrument Do Not Operate in an Explosive AtmosphereDisclaimer of Warranty ReliabilityLife Support Policy B BIOS GlossaryA ATA ATAPIC CELLULAR G GPS MPEG M MIDIN NDIS NTSCS SCSI R RAMSECAM SMBusW WAN V VGAAcronyms and Abbreviations Page Technical & Sales Assistance techsupp@eurotech.itftp//ftp.eurotech.it