Eurotech Appliances CPU-1461 user manual J5 IDE Connector, Ide/Dom

Page 18

J5 IDE Connector

18		PC/104-Plus – CPU-1461 Module

J5 IDE Connector

The CPU-1461 module provides an interface for up to two Integrated Device Electronics (IDE) hard disk drives on connector J5.

J5

IDE/DOM

Figure 6. J5 Connector layout

To install the hard disk, perform the following operations:

¾Hardware installation. Connect the hard disk to the module using a data cable, and then connect the hard disk to the power supply according to the device’s specifications. Make sure that pin 1 of connector J5 and pin 1 of the drive or drives are correctly connected. Pin 1 of the interface cable is usually indicated by a stripe along the edge of the cable. If two hard disks need to be connected, they must be configured for common operation (i.e. master/slave or cable select connection).

¾IDE BIOS Setup. The hard disk parameters can be configured using the Setup program. If the hard disk is connected to the module without setup configuration or with a wrong setup configuration, a time-out of a few minutes occurs.

¾Software initialization for specific operating systems. Refer to the OS documentation.

Image 18

Contents User’s Manual CPU-1461EmbeddedDNA COPYRIGHT 1994-2005 Eurotech S.p.A. All Rights ReservedPC/104-Plus - CPU-1461 Module Important features or Environmental safetyConventions IconPage Contents ContentsMultifunction Connector Section Connectors DescriptionChapter 4 The Set-up Program Chapter 5 Watch Dog TimerChapter 6 Troubleshooting AppendixChapter 1 Product Overview Power Supply Product DefinitionBIOS Flash ArchitectureChapter 2 Jumper Description Jumper # Jumper Layout and ConfigurationDefault TypeChapter 3 Connectors Description J14 J16 J17 Connectors LayoutNote in figure 2, a red square pad indicates pin 1 of each connector J4J5Page J4 for Multifunction and VGA CPU-1461Carrier Module Multifunction Connector Section ƒ External Battery The Eurotech Multifunction Adapterƒ System reset ƒ SpeakerVGA Section Supported CRT-VGA Video ResolutionsJ5 IDE Connector IDE/DOMJ7 for USB 2.0 Ports 5 and USBPower button input J9 Auxiliary Power ConnectorPower AuxiliaryJ14 for USB 1.1 Ports 7 and 8 and Audio-CODEC The Eurotech USB & AC97-Audio Codec AdapterAux IN To J14 CPU Board ConnectorAux IN CD IN SpkPhone IN/OUTJ16 for USB 2.0 Ports 1to J17 for SERIAL1 and SERIAL2 J20 for Ethernet EthernetThe Eurotech Ethernet Transceiver To CPU Board NetConnectorRJ45 Connector Chapter 4 The Set-up Program Select “Quit” to exit from the Setup program Use the cursor arrow keys to move the highlight to other optionsPress the “ESC” key to return to the items of the Main menu The follow screen will be displayed The Set-up pages General PageDate Quick BootTime Floppy disksDevices Page Boot Try SequenceFloppy Controller AC97 Controller Primary and secondary EIDEVideo Controller NetworkCommunications Page Serial Ports 1 andParallel Port VP2000 and VT100Parallel Port Mode Primary and Secondary ATAPI Page ATAPI unit typeCylinders PIO ModeTranslation Mode HeadsAdvanced page Detect NowPCI Advanced Page ISA IRQLatency Time Devices Error Handling Page ISA BusError on Floppy Disks Error on KeyboardError on Video Error on Fixed DisksPage Chapter 5 Watch Dog Timer This chapter explains how to use the Watch Dog timerUse the System BIOS INT 52h functions What is a Watch Dog?How to use the Watch Dog How to turn the Watch Dog ONDirectly accessing Watch Dog I/O mapped registers How to turn the Watch Dog OFFUse the following code to Enable Watch Dog Use following code to refresh the Watch Dog Chapter 6 Troubleshooting Technical/Sales Assistance Common Problems and SolutionsTroubleshooting a PC/104 System CPU Module doesn’t workReturning For Service ftp//ftp.eurotech.itPage Company Name Page Appendix Electrical Operating Characteristics A.1 Electrical and Environmental SpecificationsOperating Characteristics Backup Battery CharacteristicsAbsolute Maximum Ratings MTBF Mean Time Between Failures¾ Dimensions 90 X 96 mm 3.6”X3.8” A.2 Mechanical DimensionsThe CPU-1461 mechanical dimensions are shown in the following picture CPU-1461 Board dimensionsUSB Audio Codec Dimensions Ethernet Adapter Dimensions62.0 A.3 Safety SummaryMultifunction Adapter Dimensions 12.0Ground the Instrument Use Caution When Exposing or Handling the CRTObserve Dangerous Procedure Warnings Do Not Operate in an Explosive AtmosphereDisclaimer of Warranty ReliabilityLife Support Policy A ATA GlossaryB BIOS ATAPIC CELLULAR G GPS N NDIS M MIDIMPEG NTSCSECAM R RAMS SCSI SMBusV VGA W WANAcronyms and Abbreviations Page Technical & Sales Assistance techsupp@eurotech.itftp//ftp.eurotech.it