Energy Conserve Specify whether you want Disabled to appear in the Power Saver menu.
On*
Off
* Factory default setting
USB Menu
Use the USB menu to change printer settings on jobs sent through a USB port.
From this | You can: |
menu: |
|
NPA Mode | Send print jobs to the printer and query printer status information at the same time. |
| Off |
| On |
| Auto* |
MAC Binary PS | Configure the printer to process Macintosh binary PostScript print jobs. |
NOTE: This setting can cause print jobs sent from Windows to fail.
USB Speed | Specify the speed of the USB cable you are using. |
Full
NOTE: This forces the USB port to run at full speed, disabling all
Auto*
* Factory default setting
Utilities Menu
Use the Utilities menu to troubleshoot printer problems.
From this | You can: |
menu: |
|
Press and hold the Continue button . | |
Configuration |
|
Mode |
|
Instructions |
|
Reset Factory | Return your printer settings to the factory default values by pressing and holding the Continue button |
Defaults | . |
| NOTE: All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) are |
| deleted. Resources in flash memory are unaffected. |
Hex Trace | Help isolate printing problems when unexpected characters print or characters are missing. Hex Trace |
| helps you determine if there is a problem with the language interpreter or the cable by telling you what |
| information your printer is receiving. |