+,&*-+ | Dell CPt V/CPt S Series, CPx H/CPx J Series manual

The procedures in this manual require the following tools:

Number 1 magnetized Phillips-head screwdriver

Small flat-blade screwdriver

Small plastic scribe

Microprocessor extractor

(

)&(

+,&-+.,

&-+.

.((&

1.Save any work in progress and close all open application programs.

2.Turn off the computer and any attached peripherals.

NOTE: Make sure the computer is turned off and not in suspend-to-disk or hibernate mode. If you cannot shut down the computer using the com- puter’s operating system, press and hold the power button for 4 seconds.

3.If the computer is docked in a C/Dock Family Expansion Station or C/Port Family Advanced Port Replicator (APR), undock the computer.

4.Disconnect the computer and any attached peripherals from their electrical outlets to reduce the potential for personal injury or shock. Also disconnect any telephone or telecommunications lines from the computer.

5.Disconnect all other external cables from the computer.

6.Remove any installed PC Cards or plastic blanks from the PC Card slot.

7.Remove any installed devices in the modular device bay.

2 Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual

*+￿￿,￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿&￿￿￿￿￿￿￿￿￿￿￿￿￿￿*￿-+￿.,￿￿￿￿￿￿￿￿￿￿

+,&-+.,