Dell CPx H/CPx J Series, CPt V/CPt S Series manual Support.dell.com

￿￿￿￿￿￿￿￿.￿(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿&

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

5.Turn the computer upside down on a flat work surface.

6.Remove the five 20-mm screws that secure the palmrest to the computer.

These screws, labeled with a “circle P,” are located underneath the front edge of the computer (see Figure 19).

7.Turn the computer right-side up on the work surface.

8.Disconnect the palmrest flex cable from the touch-pad connector on the system board (see Figure 20).

palmrest flex cable

palmrest assembly

touch-pad connector

bottom case assembly

￿￿￿￿￿￿￿￿7￿￿￿"￿￿￿￿￿%￿￿)%%￿￿!￿￿￿￿￿￿￿￿￿￿

9.Carefully remove the palmrest assembly from the bottom case assembly (see Figure 20).

support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 31