Dell CPx H/CPx J Series, CPt V/CPt S Series manual Support.dell.com

4-mm screw with captive washers

white marks on the system board

bottom case assembly

system board assembly

10-mm screw (system with modem)

or 4-mm screw (system without modem)

M2.5x4

M2.5x10

￿￿￿￿￿￿￿￿￿￿￿￿￿￿%￿￿￿￿￿￿￿￿￿￿)%%￿￿!￿￿

10.Remove the modem (if present).

11.Lift the system board assembly out of the bottom case assembly.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿-"￿￿￿￿￿￿￿￿￿￿

1.Install the replacement system board.

2.Replace the modem (if present).

3.Replace the system board mounting screws.

4.Replace the microprocessor, the palmrest assembly, the display assembly and the keyboard assembly.

NOTE: Be sure to transfer the memory module(s) to the replacement system board assembly.

5.Replace the modular bay devices and any PC Cards or plastic blanks in the PC Card slot.

6.Insert the diskette (or CD-ROM) that accompanied the replacement system board assembly into the appropriate drive, and turn on the computer. Follow the instructions on the display screen.

NOTE: After replacing the system board assembly, be sure to enter the sys- tem’s service tag number into the BIOS of the replacement system board assembly.

support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 35