Hard Drive Boards
Removing a 2.5-inch Hard Drive Board
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1Remove the hard disks. See "Hard Drives" on page 69.
2Disconnect the four SATA cables between the hard drive board and the system board.
2.5” HDD |
| 2.5” HDD |
| 2.5” HDD | ||||||
| HDD0 |
|
| HDD1 |
|
| HDD2 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HDD3 | SATA3 | |
| HDD2 | ||
| SATA2 | ||
2.5” HDD | HDD1 | ||
| |||
HDD3 | HDD0 | SATA1 | |
|
| SATA0 |
3Remove the eight screws from the hard drive board .
4Disconnect the hard drive board from the system board and lift out of the sled.
76
Installing System Components