Sennheiser SET100 manual Positioning the microphone, Relocating the microphone boom

Page 11

Positioning the microphone

Relocating the microphone boom

The microphone boom can be worn on either side of the mouth.

Loosen the quick-fixing device.

Rotate the microphone boom by 180°.

Tighten the quick-fixing device.

Positioning the microphone towards the corner of the mouth

The HME 100, HME 105 and HME 120 headsets feature a flexible microphone boom. Bend the microphone boom so that the microphone is placed at the corner of the mouth. Maintain a distance of approx. 2 cm between microphone and mouth.

35

Image 11

Contents Headset Contents Safety tips HME 100 headset Headset featuresHME 120 headset Product variantsHME 105 headset HMD 120 headset Delivery includes HME 100, HME 105 and HME 120 headsetsRecommended Accessories Connecting the headsets Preparing the headsets for useHME 120 and HMD 120 headsets Adjusting the headband Positioning the microphone towards the corner of the mouth Positioning the microphoneRelocating the microphone boom Page Mono/Stereo selection HME 100 only Using the headsetsAdjusting the volume Folding up the headphones Adjusting the microphone gainPage Replacing the ear cushions Spare partsReplacing the wind screen Connector assignment Possible cause and what to do ProblemCase of difficulty Microphone output voltage too high or too low HME HME 105 and HME HMD Technical dataHMD HMECertificate of Conformity 136