Sennheiser SET100 Using the headsets, Mono/Stereo selection HME 100 only, Adjusting the volume

Page 13

Using the headsets

Mono/Stereo selection (HME 100 only)

In general, you‘ll receive a mono sound source so that the Mono/Stereo switch can remain set to ‘Mono’. When using a stereo intercom system, set the headset to stereo operation. Remove the ear cushion (‘Replacing the ear cushions’) from the earcup with the micro- phone boom attached and set the Mono/Stereo switch to ‘Stereo’.

Adjusting the volume

Exposure to loud sounds can cause hearing damage!

Set the volume control to a medium value. Make sure that you can hear critical sounds such as warning alarms.

37

Image 13

Contents Headset Contents Safety tips HME 100 headset Headset featuresHME 105 headset Product variantsHME 120 headset HMD 120 headset Recommended Accessories HME 100, HME 105 and HME 120 headsetsDelivery includes Connecting the headsets Preparing the headsets for useHME 120 and HMD 120 headsets Adjusting the headband Relocating the microphone boom Positioning the microphonePositioning the microphone towards the corner of the mouth Page Adjusting the volume Using the headsetsMono/Stereo selection HME 100 only Folding up the headphones Adjusting the microphone gainPage Replacing the wind screen Spare partsReplacing the ear cushions Connector assignment Case of difficulty ProblemPossible cause and what to do Microphone output voltage too high or too low HME HME 105 and HME HMD Technical dataHMD HMECertificate of Conformity 136