Sennheiser SET100 manual Contents

Page 2

Contents
Safety tips	27
Headset features	28
Product variants	29
Delivery includes	31
Preparing the headsets for use	32
Connecting the headsets	32
Adjusting the headband	34
Positioning the microphone	35
Using the headsets	37
Mono/Stereo selection (HME 100 only)	37
Adjusting the volume	37
Adjusting the microphone gain	38
Folding up the headphones	38
Additional information for helicopter use of the HME 120 headset	39
Spare parts	40
Replacing the wind screen	40
Replacing the ear cushions	40
Connector assignment	41
Troubleshooting	42
Technical data	44

26

Image 2

Contents Headset Contents Safety tips Headset features HME 100 headsetHME 120 headset Product variantsHME 105 headset HMD 120 headset Delivery includes HME 100, HME 105 and HME 120 headsetsRecommended Accessories Preparing the headsets for use Connecting the headsetsHME 120 and HMD 120 headsets Adjusting the headband Positioning the microphone towards the corner of the mouth Positioning the microphoneRelocating the microphone boom Page Mono/Stereo selection HME 100 only Using the headsetsAdjusting the volume Adjusting the microphone gain Folding up the headphonesPage Replacing the ear cushions Spare partsReplacing the wind screen Connector assignment Possible cause and what to do ProblemCase of difficulty Microphone output voltage too high or too low Technical data HME HME 105 and HME HMDHME HMDCertificate of Conformity 136