Sennheiser SET100 manual Spare parts, Replacing the wind screen, Replacing the ear cushions

Page 16

Spare parts

The following spare parts are available from your Sennheiser agent:

Wind screen for MKE 45-1 electret microphone

Cable clip

Carry and storage bag with shoulder strap

Ear cushions

Replacing the wind screen

If the wind screen for the electret microphone shows signs of wear such as tears or holes, replace the wind screen. Pull the wind screen from the microphone. Gently slide-on the new wind screen and ensure that it fits securely over the microphone.

Replacing the ear cushions

Replace the ear cushions if they are damaged. Grasp behind the ear cushions and pull them up and away from the earcups. Slide the new ear cushions onto the earcups. For best results replace the ear cushions after 100 hours of use or two years.

40

Image 16
Contents Headset Contents Safety tips Headset features HME 100 headsetHME 105 headset Product variantsHME 120 headset HMD 120 headset Recommended Accessories HME 100, HME 105 and HME 120 headsetsDelivery includes Preparing the headsets for use Connecting the headsetsHME 120 and HMD 120 headsets Adjusting the headband Relocating the microphone boom Positioning the microphonePositioning the microphone towards the corner of the mouth Page Adjusting the volume Using the headsetsMono/Stereo selection HME 100 only Adjusting the microphone gain Folding up the headphonesPage Replacing the wind screen Spare partsReplacing the ear cushions Connector assignment Case of difficulty ProblemPossible cause and what to do Microphone output voltage too high or too low Technical data HME HME 105 and HME HMDHME HMDCertificate of Conformity 136