Sennheiser SET100 manual Preparing the headsets for use, Connecting the headsets

Page 8

Connecting cable for HME 100

Connecting cable for HME 105

Preparing the headsets for use

Connecting the headsets

HME 100 headset:

1 1/4” (6.35 mm) stereo jack plug for connecting the headphones 1 PJ-068 jack plug for connecting the microphone

Connect the 1/4” (6.35 mm) stereo jack plug for the headphones and the PJ-068 jack plug for the microphone to the corresponding jack sockets of your intercom.

HME 105 headset:

1 XLR-5 plug for connecting the headphones and the microphone

Connect the XLR-5 plug for the headphones and the microphone to the XLR-5 socket of your intercom.

32

Image 8

Contents Headset Contents Safety tips Headset features HME 100 headsetHME 120 headset Product variantsHME 105 headset HMD 120 headset Delivery includes HME 100, HME 105 and HME 120 headsetsRecommended Accessories Preparing the headsets for use Connecting the headsetsHME 120 and HMD 120 headsets Adjusting the headband Positioning the microphone towards the corner of the mouth Positioning the microphoneRelocating the microphone boom Page Mono/Stereo selection HME 100 only Using the headsetsAdjusting the volume Adjusting the microphone gain Folding up the headphonesPage Replacing the ear cushions Spare partsReplacing the wind screen Connector assignment Possible cause and what to do ProblemCase of difficulty Microphone output voltage too high or too low Technical data HME HME 105 and HME HMDHME HMDCertificate of Conformity 136