Sennheiser SET100 manual

Page 12

For positioning the microphone of the HMD 120 headset, proceed as follows:

Adjust the length of the microphone boom so that the microphone is placed at the corner of the mouth. To do so, loosen the quick-fixing device and adjust the microphone boom in length.

Pull the middle part of the microphone boom towards the mouth so that the distance between microphone and mouth is approx. 2 cm.

Tilt the microphone for final positioning.

Image 12

Contents Headset Contents Safety tips Headset features HME 100 headsetProduct variants HME 105 headsetHME 120 headset HMD 120 headset HME 100, HME 105 and HME 120 headsets Recommended AccessoriesDelivery includes Preparing the headsets for use Connecting the headsetsHME 120 and HMD 120 headsets Adjusting the headband Positioning the microphone Relocating the microphone boomPositioning the microphone towards the corner of the mouth Page Using the headsets Adjusting the volumeMono/Stereo selection HME 100 only Adjusting the microphone gain Folding up the headphonesPage Spare parts Replacing the wind screenReplacing the ear cushions Connector assignment Problem Case of difficultyPossible cause and what to do Microphone output voltage too high or too low Technical data HME HME 105 and HME HMDHME HMDCertificate of Conformity 136