Dell P40G002 owner manual Installing the Coin-Cell Battery, Removing the Wwan Card

Page 15

Installing the Coin-Cell Battery

1.Insert the coin-cell battery to its place on the computer.

2.Connect the coin-cell battery cable to its connector on the system board.

3.Install:

a.base cover

b.battery

4.Follow the procedures in After Working Inside Your computer.

Removing the WWAN Card

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a.battery

b.base cover

3.Perform the following steps as shown in the illustration:

a.Disconnect the WWAN cables from their connectors on the WWAN card [1].

b.Remove the screw that secures the WWAN card to the computer [2].

c.Remove the WWAN card from the computer [3].

15

Image 15

Contents Dell Latitude E7450 Page Contents Specifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your Computer Docking Your Computer Recommended Tools Removing and Installing ComponentsSystem Overview Follow the procedures in Before Working Inside Your Computer Removing the BatteryInstalling the Battery Follow the procedures in After Working Inside Your computerRemoving the Base Cover Installing the Base Cover Battery Base coverRemoving the Hard Drive Removing the Coin-Cell Battery Installing the Hard DriveRemoving the Wwan Card Installing the Coin-Cell BatteryInstalling the Wwan Card Installing the Wlan CardRemoving the Wlan Card Installing the System Fan Removing the System FanRemoving the Display Bezel Installing the Display Bezel Battery Display bezelRemoving the Display Panel Page Installing the Display Panel Battery Display bezel Display panelRemoving the Camera Removing the Keyboard Trim Installing the CameraInstalling the Keyboard Trim Battery Base cover Keyboard trimRemoving the Keyboard Removing the Palmrest Installing the KeyboardBattery Base cover Keyboard trim Installing the Palmrest Battery Base cover Hard drive Keyboard trim PalmrestRemoving the Speakers Installing the Speaker Installing the I/O Board Removing the I/O BoardRemoving the Display-Hinge Cover Installing the Display-Hinge Cover Keyboard trim PalmrestPalmrest Keyboard Keyboard trim Base cover Battery Base cover Keyboard trim Hard drive Palmrest Removing the Display AssemblyInstalling the Display Assembly Removing the System Board Display assembly Hinge cover Wlan card Installing the System BoardRemoving the Heatsink Installing the HeatsinkRemoving the Power-Connector Port Installing the Power Connector System Setup Boot SequenceNavigation Keys System Setup Options PS2 SATA-0 Enables several security features KEK Hyper-Thread Control Page Post Behavior Wwan Updating the Bios Password Type System and Setup PasswordPage Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsDevice Status Lights Battery Status LightsPage Specifications UMA FHD Discharge 0 C to 70 C 32 F to 122 F AC Adapter Environmental Contacting Dell