Dell P40G002 owner manual SATA-0

Page 39

Option	Description

		NOTE: SATA is configured to
		support RAID mode.
Drives	Allows you to configure the SATA drives
	on board. The options are:
	•	SATA-0
	•	SATA-1
	•	SATA-2
	•	SATA-3
	Default Setting: All drives are enabled.
SMART Reporting	This field controls if the hard-drive
	errors for the integrated drives are
	reported during system startup. This
	technology is part of the SMART (Self
	Monitoring Analysis and Reporting
	Technology) specification.
	• Enable SMART Reporting - This
		option is disabled by default.
USB Configuration	Allows you to define the USB
	configuration. The options are:
	•	Enable Boot Support
	• Enable External USB Port
	•	Enable USB3.0 Controller
	Default Setting: All the options are
	enabled.
USB PowerShare	Allows you to configure the behavior of
	the USB PowerShare feature. The option
	is disabled by default.
	•	Enable USB PowerShare
Audio	Allows you to enables or disables the
	integrated audio controller.
	• Enable Audio—This option is
		enabled by default.
Unobtrusive Mode	Allows you to set the mode that will turn
	off all light and sound emissions from
	the system. The option is disabled by
	default.
	•	Enable Unobtrusive Mode
Miscellaneous Devices	Allows you enable or disable the various
	on board devices. The options are:
	•	Enable Microphone
	• Enable Hard Drive Free Fall
		Protection

39

Image 39

Contents

Dell Latitude E7450 Page Contents Specifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your Computer Docking Your Computer Recommended Tools Removing and Installing ComponentsSystem Overview Follow the procedures in Before Working Inside Your Computer Removing the BatteryInstalling the Battery Follow the procedures in After Working Inside Your computerRemoving the Base Cover Installing the Base Cover Battery Base coverRemoving the Hard Drive Removing the Coin-Cell Battery Installing the Hard DriveRemoving the Wwan Card Installing the Coin-Cell BatteryInstalling the Wwan Card Installing the Wlan CardRemoving the Wlan Card Installing the System Fan Removing the System FanRemoving the Display Bezel Installing the Display Bezel Battery Display bezelRemoving the Display Panel Page Installing the Display Panel Battery Display bezel Display panelRemoving the Camera Removing the Keyboard Trim Installing the CameraInstalling the Keyboard Trim Battery Base cover Keyboard trimRemoving the Keyboard Removing the Palmrest Installing the KeyboardBattery Base cover Keyboard trim Installing the Palmrest Battery Base cover Hard drive Keyboard trim PalmrestRemoving the Speakers Installing the Speaker Installing the I/O Board Removing the I/O BoardRemoving the Display-Hinge Cover Installing the Display-Hinge Cover Keyboard trim PalmrestPalmrest Keyboard Keyboard trim Base cover Battery Base cover Keyboard trim Hard drive Palmrest Removing the Display AssemblyInstalling the Display Assembly Removing the System Board Display assembly Hinge cover Wlan card Installing the System BoardRemoving the Heatsink Installing the HeatsinkRemoving the Power-Connector Port Installing the Power Connector System Setup Boot Sequence Navigation Keys System Setup Options PS2 SATA-0 Enables several security features KEK Hyper-Thread Control Page Post Behavior Wwan Updating the Bios Password Type System and Setup PasswordPage Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsDevice Status Lights Battery Status LightsPage Specifications UMA FHD Discharge 0 C to 70 C 32 F to 122 F AC Adapter Environmental Contacting Dell