Dell P40G002 owner manual Installing the Power Connector

Page 35

Installing the Power Connector

1.Insert the power connector in its slot on the computer chassis.

2.Place the metal bracket on the power-connector port.

3.Tighten the screws to secure the power-connector port to the computer chassis.

4.Install:

a.system board

b.system fan

c.speaker

d.I/O board

e.coincell battery

f.camera

g.display assembly

h.hinge cover

i.WLAN card

j.WWAN card

k.hard drive

l.palmrest

m.keyboard

n.keyboard trim

o.base cover

p.battery

5.Follow the procedures in After Working Inside Your computer.

35

Image 35

Contents Dell Latitude E7450 Page Contents Specifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your Computer Docking Your Computer Recommended Tools Removing and Installing ComponentsSystem Overview Follow the procedures in Before Working Inside Your Computer Removing the BatteryRemoving the Base Cover Installing the BatteryFollow the procedures in After Working Inside Your computer Removing the Hard Drive Installing the Base CoverBattery Base cover Removing the Coin-Cell Battery Installing the Hard DriveRemoving the Wwan Card Installing the Coin-Cell BatteryRemoving the Wlan Card Installing the Wwan CardInstalling the Wlan Card Removing the Display Bezel Installing the System FanRemoving the System Fan Removing the Display Panel Installing the Display BezelBattery Display bezel Page Removing the Camera Installing the Display PanelBattery Display bezel Display panel Removing the Keyboard Trim Installing the CameraRemoving the Keyboard Installing the Keyboard TrimBattery Base cover Keyboard trim Removing the Palmrest Installing the KeyboardBattery Base cover Keyboard trim Removing the Speakers Installing the PalmrestBattery Base cover Hard drive Keyboard trim Palmrest Installing the Speaker Removing the Display-Hinge Cover Installing the I/O BoardRemoving the I/O Board Palmrest Keyboard Keyboard trim Base cover Installing the Display-Hinge CoverKeyboard trim Palmrest Battery Base cover Keyboard trim Hard drive Palmrest Removing the Display AssemblyInstalling the Display Assembly Removing the System Board Display assembly Hinge cover Wlan card Installing the System BoardRemoving the Heatsink Installing the HeatsinkRemoving the Power-Connector Port Installing the Power Connector Navigation Keys System SetupBoot Sequence System Setup Options PS2 SATA-0 Enables several security features KEK Hyper-Thread Control Page Post Behavior Wwan Updating the Bios Password Type System and Setup PasswordPage Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsDevice Status Lights Battery Status LightsPage Specifications UMA FHD Discharge 0 C to 70 C 32 F to 122 F AC Adapter Environmental Contacting Dell