Dell P40G002 owner manual PS2

Page 38

Option

Description

 

 

 

 

Onboard NIC

Advance Boot Option

This option is required for Legacy boot

 

mode. This option is not allowed if

 

Secure Boot is enabled.

 

• Enable Legacy Option ROMs — This

 

 

option is disabled by default.

Date/Time

Allows you to set the date and time.

Table 3. System Configuration

 

 

 

 

Option

Description

 

 

Integrated NIC

Allows you to configure the integrated

 

network controller. The options are:

 

Disabled

 

Enabled

 

• Enabled w/PXE: This option is

 

 

enabled by default.

 

• Enable UEFI Network Stack: This

 

 

allows you to enable UEFI

 

 

Networking Protocols in pre-OS and

 

 

early OS networking environment.

Parallel Port

Allows you to define and set how the

 

parallel port on the docking station

 

operates. You can set the parallel port

 

to:

 

 

Disabled

 

AT

 

PS2

 

ECP

Serial Port

Identifies and defines the serial port

 

settings. You can set the serial port to:

 

Disabled

 

COM1 (Default Setting)

 

COM2

 

COM3

 

COM4

 

 

NOTE: The operating system may

 

 

allocate resources even if the

 

 

setting is disabled.

SATA Operation

Allows you to configure the internal

 

SATA hard-drive controller. The options

 

are:

 

Disabled

 

AHCI

 

• RAID On (Default Setting)

38

Image 38
Contents Dell Latitude E7450 Page Contents Specifications Contacting Dell Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your Computer Docking Your Computer Removing and Installing Components Recommended ToolsSystem Overview Removing the Battery Follow the procedures in Before Working Inside Your ComputerRemoving the Base Cover Installing the BatteryFollow the procedures in After Working Inside Your computer Removing the Hard Drive Installing the Base CoverBattery Base cover Installing the Hard Drive Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the Wwan CardRemoving the Wlan Card Installing the Wwan CardInstalling the Wlan Card Removing the Display Bezel Installing the System FanRemoving the System Fan Removing the Display Panel Installing the Display BezelBattery Display bezel Page Removing the Camera Installing the Display PanelBattery Display bezel Display panel Installing the Camera Removing the Keyboard TrimRemoving the Keyboard Installing the Keyboard TrimBattery Base cover Keyboard trim Installing the Keyboard Removing the PalmrestBattery Base cover Keyboard trim Removing the Speakers Installing the PalmrestBattery Base cover Hard drive Keyboard trim Palmrest Installing the Speaker Removing the Display-Hinge Cover Installing the I/O BoardRemoving the I/O Board Palmrest Keyboard Keyboard trim Base cover Installing the Display-Hinge CoverKeyboard trim Palmrest Removing the Display Assembly Battery Base cover Keyboard trim Hard drive PalmrestInstalling the Display Assembly Removing the System Board Installing the System Board Display assembly Hinge cover Wlan cardInstalling the Heatsink Removing the HeatsinkRemoving the Power-Connector Port Installing the Power Connector Navigation Keys System SetupBoot Sequence System Setup Options PS2 SATA-0 Enables several security features KEK Hyper-Thread Control Page Post Behavior Wwan Updating the Bios System and Setup Password Password TypePage Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsBattery Status Lights Device Status LightsPage Specifications UMA FHD Discharge 0 C to 70 C 32 F to 122 F AC Adapter Environmental Contacting Dell