Dell PP01X owner manual Customizing the Touch Pad and Track Stick, Changing the Track Stick Cap

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

•To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch pad button twice.

You can also use the track stick to move the cursor. Press the track stick left, right, up, or down to change the direction of the cursor on the display. Use the track stick and track stick buttons as you would use a mouse.

Customizing the Touch Pad and Track Stick

You can disable the touch pad and track stick or adjust their settings using

the Mouse Properties window.

1Click the Start button and click Control Panel.

2Click Printers and Other Hardware and click Mouse.

3In the Mouse Properties window, click the Device Settings tab.

To disable the touch pad or mouse, highlight the device and click Disable. (If your computer is docked and connected to a PS/2 mouse, the touch pad and track stick may already be disabled.)

To change the touch pad or mouse settings, highlight the device, click Settings, select the desired setting(s), and then click Apply.

4Click OK to save the settings and close the window, and then click OK again to exit the Mouse Properties window.

Changing the Track Stick Cap

You can replace your track stick cap if it wears down from prolonged use or if you prefer a different color. You can purchase additional caps by visiting the Dell website at www.dell.com.

50

Setting Up and Using Your Computer