Replacing the Half Mini-Card
1.Follow the instructions in “Before You Begin” on page 6.
2.Remove the new half
CAUTION: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
3.Align the notch on the card with the tab on the system board connector.
4.Insert the half
5.Press the other end of the half
6.Connect the appropriate antenna cables to the half
Connectors on the | Antenna Cable Color Scheme |
|
|
WLAN (2 or 3 antenna cables): |
|
Main WLAN (white triangle) | white |
Auxiliary WLAN (black triangle) | black |
MIMO WLAN (gray triangle) | gray |
(optional) |
|
CHAPTER 11: WIRELESS
7.Replace the keyboard (see “Replacing the Keyboard” on page 35).
8.Replace the center control cover (see “Replacing the Center Control Cover” on page 31).
9.Replace the memory module(s) (see “Replacing the Memory Module(s)” on page 21).
10.Replace the hard drive (see “Replacing the Hard Drive” on page 18).
11.Replace the compartment door (see “Replacing the Compartment Door” on page 14).
12.Replace the battery pack (see “Replacing the Battery Pack” on page 11).
047/047