CHAPTER 17: DISPLAY
Replacing the AlienHead Board
1.Follow the instructions in “Before You Begin” on page 6.
2.Align the AlienHead board with the tabs on the display back cover. Gently press and slide the AlienHead board into place.
3.Replace the two screws that secure the AlienHead board to the display back cover.
4.Replace the display panel (see “Replacing the Display Panel” on page 78).
5.Replace the display hinge cover (see “Replacing the Display Hinge Cover” on page 76).
6.Replace the display assembly (see “Replacing the Display Assembly” on page 75).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
080/080