CNET CNWR-811P manual Connect LAN Cable, Connect WAN Cable, Connect Printer Cable, Power Up

Page 11

CNWR-811P User Guide

3. Connect LAN Cable

Connect a standard LAN cable from a 10BaseT or 100BaseTX Hub on your LAN to the “HUB” port on the CNWR-811P.

4. Connect WAN Cable

Connect the ADSL or Cable modem to the WAN port on the CNWR-811P. Use the cable supplied with your modem. If no cable was supplied, use a standard LAN cable.

5. Connect Printer Cable

Use a standard parallel printer cable to connect your printer to the Printer port on the CNWR-811P.

6. Power Up

Connect the supplied power adapter and power up.

Use only the power adapter provided.

7. Check the LEDs

•The Status LED should flash, then turn Off. If it stays on, there is a hardware error.

•The Power LED should be ON.

•One (1) of the LAN LEDs (10 or 100) should be ON.

•The Wireless LED should be ON.

•If the printer is On and On-line, the Print Act LED should be ON.

For more information, refer to LEDs in Chapter 1.

Image 11

Contents User’s Guide Table of Contents CNWR-811P Wireless A/P Router Pcmcia Wireless Card Appendix B SpecificationsIntroduction CNWR-811P FeaturesLAN Features Advanced Internet Functions Internet Access FeaturesConfiguration & Management Wireless FeaturesPackage Contents Flashing transmitting or receiving data via the WAN port Physical DetailsLEDs On WAN connection is establishedUse both Rear PanelUse Either the PC port or the Hub port. You can not DIP Switch Setting Description DIP SwitchesRestore Default IP Address Clear Password Insert Wireless Pcmcia card InstallationProcedure Choose an Installation SiteConnect Printer Cable Power UpConnect LAN Cable Connect WAN CableTo Do this Refer to ConfigurationOverview If you cant connect Configuration ProgramConnecting to the CNWR-811P PreparationNavigation & Data Input PasswordDhcp Server LAN ConfigurationLAN Screen Data LAN ScreenRouting Table DNS Domain Name ServerDevice ID WAN ConfigurationWAN Direct Connection Data WAN Direct ConnectionButtons IP AddressOptions WAN PPPoEData WAN PPPoE AccountConfiguration Wireless ConfigurationData Wireless Screen WEP Data Privacy Wireless Station AccessDelete Access For Wireless Stations listed above PermissionFor Other Wireless Stations New stationWAN Status WAN StatusWAN Status Direct Connection DataConnection Log WAN Status PPPoEStatus Data Message Description Connection Log MessagesLAN Port LAN/Device StatusData LAN/Device Status DeviceStatus To check your PCs TCP/IP Settings PC ConfigurationTCP/IP Settings Using Specify an IP Address Using DhcpDNS Tab Win 95/98 Accessing AOL Internet Access ConfigurationPrint Port Driver Setup Printing SetupPort Options ManagementInterval PortBanner RetryLPD/LPR Printing Windows NT 4.0 Server ConfigurationAdding the Printer Windows 2000 Server ConfigurationWindows 2000 Select Port Client PC Setup for LPD/LPR PrintingMode Macintosh ConfigurationWhat Dhcp Does Using the CNWR-811Ps Dhcp ServerTo Configure your PCs to use Dhcp Using another Dhcp ServerRouting CNWR-811P ConfigurationUsing this Screen Other Routers on the Local LAN Router ConfigurationRouting Table Data Local RouterEntry 2 Segment Routing ExampleFor the CNWR-811Ps Routing Table Entry 1 SegmentFor Router Bs Default Route For Router As Default RouteOptions PasswordWhen prompted for the password, leave the User Name blank To connect from a remote PC via the Internet NAT Network Address TranslationRemote Management Advanced Internet Screen Advanced InternetAt any time, only one 1 PC can use each Special Application Using a Special ApplicationSpecial Internet Applications Special Applications ScreenConfiguration Data from Service Provider IP Address seen by Internet Users Virtual ServersWAN IP Address Virtual Server ConfigurationTypes of Virtual Servers LAN IP Address User Defined Virtual ServersType Details Configuring the DMZ Connecting to the Virtual ServersLAN IP Address EnableData To use this feature Access ControlTo Define a Security Group To Change Access for an Existing GroupSecurity Groups OperationsPacket Filter Table Access Rights Internet Access for this GroupTo Change an Existing PCs Details PCsTo Add a New PC To Delete an Existing PCFilters UDP Filters TCP PacketsTCP Filters Port NoInternet Access TroubleshootingGeneral Problems Wireless Access Printing To remove an existing printer port installationCNWR-811P User Guide Appendix a Troubleshooting CNWR-811P Wireless A/P Router SpecificationsPcmcia Wireless Card