CNET CNWR-811P manual Details

CNWR-811P User Guide

•To Modify (Edit) a defined Server

-Select it from the drop-down list,

-Click "Get Data"

-Make any desired changes. Note that you can "Enable" and "Disable" a Server using this process.

-Click "Update"

•To Delete a defined Server

-Select it from the drop-down list,

-Click "Delete"

•To List all Servers

-Click "List All"

Data

WAN IP	• This shows the IP Address which Internet users must use to connect to
Address		any of your Virtual Servers.
	• To Internet Users, ALL your Virtual Servers have the same IP Ad-
		dress.
	• This IP Address is allocated by your ISP. It is better to have a fixed IP
		Address.
Select Server	This lists any Servers you have defined. Click the "Get Data" button to
	view the correct data for the selected Server.
Details
Name	Enter a descriptive name to identify this Server entry.
Enable	Use this to Enable or Disable support for this Server, as required.
IP Address	The IP Address of the PC on your LAN which is running the Server
	software.
Protocol	Select the protocol (TCP or UDP) used by the Server.
Internal Port	Enter the port number used by the Server to connect to clients.
Number
External Port	The port number used by clients when connecting to the Server. This is
Number	normally the same as the Internal Port Number.
	If it is different, this device will perform a "mapping" or "translation"
	function, allowing the server to use one port address, while clients use a
	different port address.
			From the Internet, ALL Virtual Servers have the
			IP Address allocated by your ISP, as shown by
			the "WAN IP Address".

50