CNET CNWR-811P manual LAN Configuration, Data LAN Screen, Dhcp Server

Page 15

CNWR-811P User Guide

LAN Screen

The LAN screen, like the example below, will be displayed when you first connect.

Figure 6: LAN Screen

LAN Configuration.

For most users, the default values for these fields should be satisfactory, and no changes will be required.

If your LAN contains an existing Router or Routers, refer to Chapter 6 - Routing.

Data – LAN Screen

TCP/IP

IP Address	IP address for the CNWR-811P. Use the default value of 192.168.0.1
	unless the address is already in use or your LAN is using a different IP
	address range. In the latter case, enter an unused IP Address from within
	the range used by your LAN.

Network Mask	The default value 255.255.255.0 is standard for small (class "C") net-
	works. For other networks, use the Network Mask for the LAN segment
	to which the CNWR-811P is attached. i.e. the same value as the PCs on
	that LAN segment.

DHCP Server

Operation

If Enabled, the CNWR-811P will allocate IP Addresses to PCs on your LAN. The default and recommended value is Enabled.

If you are already using a DHCP Server, this setting must be

12

Image 15

Contents User’s Guide Table of Contents CNWR-811P Wireless A/P Router Pcmcia Wireless Card Appendix B SpecificationsCNWR-811P Features LAN FeaturesIntroduction Advanced Internet Functions Internet Access FeaturesConfiguration & Management Wireless FeaturesPackage Contents Flashing transmitting or receiving data via the WAN port Physical DetailsLEDs On WAN connection is establishedRear Panel Use Either the PC port or the Hub port. You can notUse both DIP Switches Restore Default IP Address Clear PasswordDIP Switch Setting Description Insert Wireless Pcmcia card InstallationProcedure Choose an Installation SiteConnect Printer Cable Power UpConnect LAN Cable Connect WAN CableConfiguration OverviewTo Do this Refer to If you cant connect Configuration ProgramConnecting to the CNWR-811P PreparationNavigation & Data Input PasswordDhcp Server LAN ConfigurationLAN Screen Data LAN ScreenRouting Table DNS Domain Name ServerDevice ID WAN ConfigurationWAN Direct Connection Data WAN Direct ConnectionButtons IP AddressOptions WAN PPPoEData WAN PPPoE AccountWireless Configuration Data Wireless ScreenConfiguration WEP Data Privacy Wireless Station AccessDelete Access For Wireless Stations listed above PermissionFor Other Wireless Stations New stationWAN Status WAN StatusWAN Status Direct Connection DataWAN Status PPPoE Status DataConnection Log Message Description Connection Log MessagesLAN Port LAN/Device StatusData LAN/Device Status DeviceStatus PC Configuration TCP/IP SettingsTo check your PCs TCP/IP Settings Using Specify an IP Address Using DhcpDNS Tab Win 95/98 Accessing AOL Internet Access ConfigurationPrint Port Driver Setup Printing SetupPort Options ManagementInterval PortBanner RetryLPD/LPR Printing Windows NT 4.0 Server ConfigurationAdding the Printer Windows 2000 Server ConfigurationWindows 2000 Select Port Client PC Setup for LPD/LPR PrintingMode Macintosh ConfigurationWhat Dhcp Does Using the CNWR-811Ps Dhcp ServerTo Configure your PCs to use Dhcp Using another Dhcp ServerCNWR-811P Configuration Using this ScreenRouting Other Routers on the Local LAN Router ConfigurationRouting Table Data Local RouterEntry 2 Segment Routing ExampleFor the CNWR-811Ps Routing Table Entry 1 SegmentFor Router Bs Default Route For Router As Default RoutePassword When prompted for the password, leave the User Name blankOptions NAT Network Address Translation Remote ManagementTo connect from a remote PC via the Internet Advanced Internet Screen Advanced InternetAt any time, only one 1 PC can use each Special Application Using a Special ApplicationSpecial Internet Applications Special Applications ScreenConfiguration Data from Service Provider IP Address seen by Internet Users Virtual ServersVirtual Server Configuration Types of Virtual ServersWAN IP Address User Defined Virtual Servers TypeLAN IP Address Details Configuring the DMZ Connecting to the Virtual ServersEnable DataLAN IP Address To use this feature Access ControlTo Define a Security Group To Change Access for an Existing GroupSecurity Groups OperationsPacket Filter Table Access Rights Internet Access for this GroupTo Change an Existing PCs Details PCsTo Add a New PC To Delete an Existing PCFilters UDP Filters TCP PacketsTCP Filters Port NoTroubleshooting General ProblemsInternet Access Wireless Access Printing To remove an existing printer port installationCNWR-811P User Guide Appendix a Troubleshooting CNWR-811P Wireless A/P Router SpecificationsPcmcia Wireless Card