CNET CNWR-811P manual WAN Status PPPoE, Status Data, Connection Log

Configuration

WAN Status – PPPoE

	Figure 12: WAN Status – PPPoE
Status Data
WAN Status
Physical Address	The "Hardware" address of this device, as seen by other devices on the
	WAN.
IP Address	The IP Address of this device, as seen by devices on the WAN.
	(This device has 2 IP Addresses; one for the local LAN, and another
	for the WAN port.)
Network Mask	The Network Mask (Subnet Mask) for the IP Address above.
PPPoE Link	This indicates whether or not the connection is currently established.
Status	If the connection does not exist, the Connect button can be used to
	establish a connection.
	If the connection currently exists, the Disconnect button can be used to
	break the connection.
Connection Log

Log Data

The Connection Log shows status messages relating to the existing connection.

The most common messages are listed in the following table.

Buttons

Connect	If not connected, establish a connection to your ISP
Disconnect	If connected to your ISP, hang up the connection.
Clear Log	Delete all data currently in the Log. This will make it easier to read new
	messages.

21